Products

Pages

Accufab 1999-2001 Ford Mustang Cobra Throttle Body

Accufab 1999-2001 Ford Mustang Cobra Throttle Body

The following Accufab throttle body has been designed for the vehicles listed below:

  • 1999 - 2001 Mustang Cobra
  • 2003 - 2004 Mach 1

This Accufab throttle body easily bolts on to the stock, unmodified intake manifold and will increase total airflow with no unacceptable side effects, such as whistling or negative idle characteristics. Throttle response is greatly improved with the high quality component parts used.
 
The most common question we are asked is, "How come this throttle body doesn't have a single blade?" Honestly, our engineers found it necessary to keep the dual blade design for the main reason of idle air control bypass concerns. This throttle body is unique because the idle air control holes are actually machined into each barrel of the throttle body and then join into a single hole opening on the backside where the throttle body mounts to the intake. Thus, our engineers...

Read more

Accufab 2003-2004 Ford Mustang Cobra Throttle Body

Accufab 2003-2004 Ford Mustang Cobra Throttle Body

Accufab has developed a high flow throttle body and power inlet for the 2003-2004 Cobra. Accufab's throttle body flows 1696 cfm compared to stock 1089 cfm. Our engineers tested the stock inlet or elbow and noticed that it's design was too restrictive to accept the additional airflow our throttle body moves. Hence, we developed an aftermarket performance inlet which allows the air to flow on a straighter path directly into the intake, accounting for the major increase in performance.
 
Furthermore, the throttle body and power inlet combination, dyno testing has shown an increase of 10 horsepower by 2000 RPM, all the way up to 25 horsepower improvement at 6400 RPM. This is rear wheel horsepower. Torque also improved dramatically across the complete power range.
 
If you have a KenneBell or Whipple supercharger with a mono-blade opening, you should order the throttle body only. We do not recommend using the...

Read more

Accufab 2005-2006 Ford GT Dual Blade Throttle Body

Accufab 2005-2006 Ford GT Dual Blade Throttle Body

Accufab has developed new performance parts for the 2005-2006 Ford GT. The first, is a dual blade 75mm throttle body. The throttle body is made from the finest billet aluminum, polished to a mirror finish. It also features a stainless steel split shaft, brass blades and the highest quality bushings, bearings and screws. Dyno tests on a stock vehicle have shown an increase of 4 to 5hp. However, dyno tests on our Project GT, which has other performance modifications, showed an increase of 11hp!
 
In our research, we recognized a serious problem with the stock air inlet. It is soft and flexible and will actually collapse under stock conditions. Accufab has developed an Air Inlet Support Sleeve which simply slips into the stock inlet and offers much needed wall support. This part is highly recommended for all 2005-2006 Ford GT's.
 
Accufab part number GT75

Accufab 2005-2006 Ford GT Dual Blade Throttle Body

Accufab 2005-2006 Ford GT Dual Blade Throttle Body

If you would like to switch from a carburetor intake to electronic fuel injection (EFI), Accufab has developed two high flow throttle bodies to meet your needs. The Accufab 4150 and 4500 series throttle bodies are made from high quality billet aluminum and then polished to a mirror finish or anodized black, blue or red.
 
The Accufab 4150 flows 1215 CFM and has four 1-3/4" brass throttle plates. The Accufab 4500 flows 2128 CFM and has four 2-1/4" brass throttle plates. Both styles have high quality progressive linkage and use late model GM electronics (push-in style) are included.
 
Also, we offer an idle air control block off, part # IAC4B, and it is available polished or anodized black, blue or red.
 
Accessories Included:

  • 4150 Series throttle body includes throttle body gasket, throttle position sensor and idle air control sensor with appropriate screws to mount sensors to throttle...
Read more

Accufab 4500 4-Barrel Throttle Body Black, Blue, or Red Anodize

Accufab 4500 4-Barrel Throttle Body Black, Blue, or Red Anodize

If you would like to switch from a carburetor intake to electronic fuel injection (EFI), Accufab has developed two high flow throttle bodies to meet your needs. The Accufab 4150 and 4500 series throttle bodies are made from high quality billet aluminum and then polished to a mirror finish or anodized black, blue or red.
 
The Accufab 4150 flows 1215 CFM and has four 1-3/4" brass throttle plates. The Accufab 4500 flows 2128 CFM and has four 2-1/4" brass throttle plates. Both styles have high quality progressive linkage and use late model GM electronics (push-in style) are included.
 
Also, we offer an idle air control block off, part # IAC4B, and it is available polished or anodized black, blue or red.
 
Accessories Included:

  • 4150 Series throttle body includes throttle body gasket, throttle position sensor and idle air control sensor with appropriate screws to...
Read more

Accufab 65mm Throttle Body

Accufab 65mm Throttle Body

Accufab's 65mm throttle body and spacer was designed to be used on the 1986-1993 Ford 5.0L Mustang. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available.
 
Accessories Included:

  • Throttle body gasket
  • IAC gasket
  • EGR gaskets

No mounting hardware available.
Accufab part number F65

Accufab 70mm Throttle Body

Accufab 70mm Throttle Body

Accufab's 70mm throttle body and spacer was designed to be used on the 1986-1993 Ford 5.0L Mustang. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available.
 
Accufab has several accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS or an IAC adapter to use your GM IAC.
 
We also have available throttle position sensors and if you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals.
 
Accessories Included:

  • Throttle body gasket
  • IAC gasket
  • EGR gaskets
  • ...
Read more

Accufab 75mm Throttle Body

Accufab 75mm Throttle Body

Accufab's 75mm throttle body and spacer was designed to be used on the 1986-1993 Ford 5.0L Mustang. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available.
 
Accufab has several accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS or an IAC adapter to use your GM IAC.
 
We also have available throttle position sensors and if you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals.
 
Also, the 75mm throttle body is available in three versions:

  • Standard version for use with standard hose clamps...
Read more

Accufab 80mm Throttle Body

Accufab 80mm Throttle Body

Accufab's 80mm throttle body and blank spacer was designed to be used on the 1986-1993 Ford 5.0L Mustang. These products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel and we use only the best bearings, bushings, screws and other component parts available.
 
The throttle body is only available as a Race version, meaning it measures 80mm at the blade and has a 4" inlet. There is no vacuum elbow and 4" tubing is required to go over the inlet. The 80mm spacer is solid aluminum and is 2" thick with provisions to mount the stock cable bracket only. There are no water passages or tubes. Another option is to use our 3/8\" Cable bracket.
 
Accufab has several accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we...

Read more

Accufab 90mm Race Throttle Body

Accufab 90mm Race Throttle Body

Accufab's 90mm throttle body was designed to be used on the 1986-1993 Ford 5.0L Mustang. Our products are made from high quality billet aluminum, no castings or coatings! Each billet part is CNC machined and then the exterior aluminum is polished to a mirror finish. The shafts are CNC machined from stainless steel, the throttle blade is brass and we use only the best bearings, bushings, screws and other component parts available.
 
The 90mm throttle body features a split shaft design which helps prevent the shaft from breaking under intense pressure.
 
Also, the throttle body is available in two versions:

  • Standard Race version for use with 4" hose/tubing and standard hose clamps or
  • MAX version for use with a 4" Accufab Clamp and matching ferrule
  • Both throttle body versions measure 90mm at the blade and each has a 4" inlet. There is no vacuum elbow and 4" tubing is required. Also, the 90mm spacer is solid aluminum and...
Read more

AEM Series 2 EMS

AEM Series 2 EMS for 1989-90 Nissan 240SX (KA24E), 1991-94 Nissan 240SX (KA24E), 1993-94 Nissan Altima (KA24E), 1989-95 Nissan Bluebird (SR20DET)

AEM Part Number: 30-6600
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and...

Read more

AEM Series 2 EMS for 1990-94 Mitsubishi Eclipse (Turbo), Eagle Talon (Turbo), Mitsubishi Galant VR-4, 1989-94 Plymouth Laster (Turbo) Manual Trans Only

AEM Series 2 EMS for 1990-94 Mitsubishi Eclipse (Turbo), Eagle Talon (Turbo), Mitsubishi Galant VR-4, 1989-94 Plymouth Laster (Turbo) Manual Trans Only

AEM Part Number: 30-6300
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and...

Read more

AEM Series 2 EMS

AEM Series 2 EMS for 1990-95 Nissan 300ZX, 1992-94 Nissan Maxima VE30DE, 1989-94 Nissan Skyline (RB20DET), 1993-98 Nissan Skyline (RB25DET), Nissan 1989-04 Skyline (RB26DETT)

AEM Part Number: 30-6620
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper...

Read more

AEM Series 2 EMS

AEM Series 2 EMS for 1991-95 Nissan 180SX (SR20DET), 1991-93 Nissan Silvia S13 (SR20DET), 1994-97 Nissan 180SX S14 SR20DET w/UEGO

AEM Part Number: 30-6601
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition...

Read more

AEM Series 2 EMS for 1991-97 Mitsubishi 3000GT VR4, 1992-96 Dodge Stealth Twin Turbo

AEM Series 2 EMS for 1991-97 Mitsubishi 3000GT VR4, 1992-96 Dodge Stealth Twin Turbo

AEM Part Number: 30-6311
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition....

Read more

AEM Series 2 EMS

AEM Series 2 EMS for 1992-95 Acura Integra, 1992-95 Honda Civic, 1993-95 Honda del Sol, 1992-95 Honda Accord, 1992-95 Honda Prelude Manual Trans Only

AEM Part Number: 30-6040
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and...

Read more

AEM Series 2 EMS

AEM Series 2 EMS for 1993-98 Toyota Supra Twin Turbo

AEM Part Number: 30-6100
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.
 
This product fits the following vehicles:...

Read more

AEM Series 2 EMS

AEM Series 2 EMS for 1995-96 Nissan 200SX (GA16DE), 1995-97 Nissan 200SX (SR20DET), 1995 Nissan 240SX OBD 1 (KA24DE)

AEM Part Number: 30-6610
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any...

Read more

AEM Series 2 EMS for 1995-99 Mitsubishi Eclipse Turbo, 1995-98 Eagle Talon Turbo, 2003 Mitsubishi Lancer EVO VIII; Manual Trans

AEM Series 2 EMS for 1995-99 Mitsubishi Eclipse Turbo, 1995-98 Eagle Talon Turbo, 2003 Mitsubishi Lancer EVO VIII; Manual Trans

AEM Part Number: 30-6310
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for...

Read more

Engine Management - AEM Series 2 EMS

AEM Series 2 EMS for 1996-1999 Acura Integra, 1997 Acura CL, 1996-1997 Honda Accord, 1996-1998 Honda Civic DX/EX

AEM Part Number: 30-6060
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost...

Read more

Pages