Products

Pages

AEM Series 2 EMS

AEM Series 2 EMS for 1997-98 Nissan 200SX (GA16DE), 1998-99 Nissan 200SX (SR20DE), 1995-98 Nissan 240SX OBD2 (KA24DE), 1996-99 Nissan Altima (KA24DE)

AEM Part Number: 30-6611
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and...

Read more

AEM Series 2 EMS

AEM Series 2 EMS for 2000-01 Acura Integra, 1998-99 Acura 2.3 CL, 1998-02 Honda Accord 4 Cyl, 1999-00 Honda Civic DX/EX/Si manual trans

AEM Part Number: 30-6050
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct...

Read more

AEM Series 2 EMS

AEM Series 2 EMS for 2000-05 Honda S2000 Manual trans only

AEM Part Number: 30-6052
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.
 
This product fits the following...

Read more

AEM Series 2 EMS

AEM Series 2 EMS for 2002 Acura RSX/RSX Type-S, 2001-05 Honda Civic Manual Trans Only, 2001-04 K-engines

AEM Part Number: 30-6030
 
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below.
 
Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, Windows7) makes the task of copying, viewing and manipulating data as simple as a click of the mouse.
 
The new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or...

Read more

Aftermarket Replacement Turbocharger - 4828

Aftermarket Replacement Turbocharger - 4828

HP Rating: 400
Precision Turbo and Engine is proud to introduce our line of direct-fit upgrade replacement turbochargers with the unique CEA® (Competition Engineered Aerodynamics) 2618-forged aluminum compressor wheel. These turbochargers are specifically designed to out-perform turbos of the same size from other suppliers while delivering greater efficiency and less turbo lag.
PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 48mm inducer compressor wheel
  • "B" compressor cover 2.8" inlet/2.0" outlet
  • 53.8mm, 76 trim turbine wheel
  • Turbine housing options...
Read more

Aftermarket Replacement Turbocharger - 5128

Aftermarket Replacement Turbocharger - 5128

HP Rating: 450
Precision Turbo and Engine is proud to introduce our line of direct-fit upgrade replacement turbochargers with the unique CEA® (Competition Engineered Aerodynamics) 2618-forged aluminum compressor wheel. These turbochargers are specifically designed to out-perform turbos of the same size from other suppliers while delivering greater efficiency and less turbo lag.
 
PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 51mm inducer compressor wheel
  • Compressor cover options:
       - "B" compressor cover 2.8" inlet/2.0" outlet
       - "E" compressor cover...
Read more

Aftermarket Replacement Turbocharger - 5130

Aftermarket Replacement Turbocharger - 5130

HP Rating: 460
Precision Turbo and Engine is proud to introduce our line of direct-fit upgrade replacement turbochargers with the unique CEA® (Competition Engineered Aerodynamics) 2618-forged aluminum compressor wheel. These turbochargers are specifically designed to out-perform turbos of the same size from other suppliers while delivering greater efficiency and less turbo lag.
 
PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 51mm inducer compressor wheel
  • Compressor cover options:
       - "B" compressor cover 2.8" inlet/2.0" outlet
       - "E" compressor cover...
Read more

Aftermarket Replacement Turbocharger - 5530

Aftermarket Replacement Turbocharger - 5530

HP Rating: 525
Precision Turbo and Engine is proud to introduce our line of direct-fit upgrade replacement turbochargers with the unique CEA® (Competition Engineered Aerodynamics) 2618-forged aluminum compressor wheel. These turbochargers are specifically designed to out-perform turbos of the same size from other suppliers while delivering greater efficiency and less turbo lag.
 
PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 55mm inducer compressor wheel
  • Compressor cover options:
       - "B" compressor cover 2.8" inlet/2.0" outlet
       - "E" compressor cover...
Read more

Aftermarket Replacement Turbocharger - 6235

Aftermarket Replacement Turbocharger - 6235

HP Rating: 700
Precision Turbo and Engine is proud to introduce our line of direct-fit upgrade replacement turbochargers with the unique CEA® (Competition Engineered Aerodynamics) 2618-forged aluminum compressor wheel. These turbochargers are specifically designed to out-perform turbos of the same size from other suppliers while delivering greater efficiency and less turbo lag.
 
PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 62mm inducer compressor wheel
  • Compressor cover options:
       - "B" compressor cover 2.8" inlet/2.0" outlet
       - "E" compressor cover...
Read more

Air Temperature Sensor

Air Temperature Sensor

Precision Turbo and Engine Air Temperature Sensor. Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered!

Air to Air Intercooler - 1986-1987 Buick Turbo Regal Stock Location Intercooler

Air to Air Intercooler - 1986-1987 Buick Turbo Regal Stock Location Intercooler

Owners of the 1986-1987 Buick Turbo Regals have been raving about this product since the day it was introduced. Made with a high efficiency bar and plate core with 18 flow and 19 cooling rows, this kit comes with cast aluminum end tanks that have been specifically contoured to optimize air flow. Included with the kit is a brand new mandrel bent 3" inlet up pipe, a custom aluminum shroud and all the hoses, clamps, brackets, and mounting hardware for a true direct fit, bolt on installation. Installation instructions included.

Air to Air Intercooler Cores

Air to Air Intercooler Cores

Precision Turbo has been well known for their leadership in heat exchanger products for nearly every application. That same cutting edge technology is yours with this line of air-to-air cores.
 
All of the cores listed below feature bar and plate construction which allows the use of higher boost pressure. This construction is much more resistant to damage from road hazards than tube and fin designs.
 
Use these high efficiency cores with your own end tanks or we can custom fabricate an intercooler to your specifications.

Base MOD COP w/LS1 coils Powertrain Management System

Base MOD COP w/LS1 Coils Powertrain Management System

The BigStuff3 GEN3 PRO SEFI Engine Management System is the first programmable Powertrain Control Module for today’s SEFI Coil-on-Plug (COP) engines and electronically controlled transmissions. Offering many unique features that set it apart from the competition, BS3’s EMS uses state of the art technology to help you achieve the best performance possible from your vehicle. When compared to other units on the market, the BigStuff3 EMS's microprocessor ranked consistently higher in speed and performance. Feature-for-feature, the GEN3 system is currently the lowest priced system on the market. Available in a number of configurations, the Big Stuff 3 has a solution for all your fuel injection needs.
 
BigStuff3's Base MOD COP w/LS1 coils Powertrain Management System features the following:

  • Sequential fuel control for 4, 6, and 8 cylinders
  • Data logging with PC in the car only
  • Configurable...
Read more

Big Stu3 DAI MOD COP w/LS1 coils Powertrain Management System

Big Stu3 DAI MOD COP w/LS1 Coils Powertrain Management System

The BigStuff3 GEN3 PRO SEFI Engine Management System is the first programmable Powertrain Control Module for today’s SEFI Coil-on-Plug (COP) engines and electronically controlled transmissions. Offering many unique features that set it apart from the competition, BS3’s EMS uses state of the art technology to help you achieve the best performance possible from your vehicle. When compared to other units on the market, the BigStuff3 EMS's microprocessor ranked consistently higher in speed and performance. Feature-for-feature, the GEN3 system is currently the lowest priced system on the market. Available in a number of configurations, the Big Stuff 3 has a solution for all your fuel injection needs.
 
BigStuff3's DAI MOD COP w/LS1 coils Powertrain Management System features the following
 
Sequential fuel control for 4, 6, and 8 cylinders

  • 128k RAM for internal data logging,...
Read more

Big Stuff 3 16 Injector DAE Powertrain Management System

Big Stuff 3 16 Injector DAE Powertrain Management System

The BigStuff3 GEN3 PRO SEFI Engine Management System is the first programmable Powertrain Control Module for today’s SEFI Coil-on-Plug (COP) engines and electronically controlled transmissions. Offering many unique features that set it apart from the competition, BS3’s EMS uses state of the art technology to help you achieve the best performance possible from your vehicle. When compared to other units on the market, the BigStuff3 EMS's microprocessor ranked consistently higher in speed and performance. Feature-for-feature, the GEN3 system is currently the lowest priced system on the market. Available in a number of configurations, the Big Stuff 3 has a solution for all your fuel injection needs.
 
BigStuff3's 16 Injector DAE Powertrain Management System features the following:

  • Sequential fuel control for 4, 6, and 8 cylinders
  • 128k RAM for internal data logging, featuring 40 user...
Read more

Big Stuff 3 16 Injector DAI for PTE 500lb injectors Powertrain Management System

Big Stuff 3 16 Injector DAI for PTE 500lb Injectors Powertrain Management System

The BigStuff3 GEN3 PRO SEFI Engine Management System is the first programmable Powertrain Control Module for today’s SEFI Coil-on-Plug (COP) engines and electronically controlled transmissions. Offering many unique features that set it apart from the competition, BS3’s EMS uses state of the art technology to help you achieve the best performance possible from your vehicle. When compared to other units on the market, the BigStuff3 EMS's microprocessor ranked consistently higher in speed and performance. Feature-for-feature, the GEN3 system is currently the lowest priced system on the market. Available in a number of configurations, the Big Stuff 3 has a solution for all your fuel injection needs.
 
BigStuff3's 16 Injector DAI for PTE 500lb Injectors Powertrain Management System features the following:

  • Sequential fuel control for 4, 6, and 8 cylinders...
Read more

Big Stuff 3 16 Injector DAI Powertrain Management System

Big Stuff 3 16 Injector DAI Powertrain Management System

The BigStuff3 GEN3 PRO SEFI Engine Management System is the first programmable Powertrain Control Module for today’s SEFI Coil-on-Plug (COP) engines and electronically controlled transmissions. Offering many unique features that set it apart from the competition, BS3’s EMS uses state of the art technology to help you achieve the best performance possible from your vehicle. When compared to other units on the market, the BigStuff3 EMS's microprocessor ranked consistently higher in speed and performance. Feature-for-feature, the GEN3 system is currently the lowest priced system on the market. Available in a number of configurations, the Big Stuff 3 has a solution for all your fuel injection needs.
 
BigStuff3's 16 Injector DAI Powertrain Management System features the following:

  • Sequential fuel control for 4, 6, and 8 cylinders
  • 128k RAM for internal data logging, featuring 40 user...
Read more

Big Stuff 3 1986-1987 Buick Turbo Regal Interface Harness (Long)

Big Stuff 3 1986-1987 Buick Turbo Regal Interface Harness (Long)

Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered! In addition, we offer both universal and application specific engine wiring harnesses, adapter harnesses, and fuel injector harnesses. Don't see what you need? Please contact one of our friendly Sales/Technical Representatives and they will be able to assist you with all your Engine Management accessory needs.

Big Stuff 3 1986-1987 Buick Turbo Regal Interface Harness (Standard)

Big Stuff 3 1986-1987 Buick Turbo Regal Interface Harness (Standard)

Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered! In addition, we offer both universal and application specific engine wiring harnesses, adapter harnesses, and fuel injector harnesses. Don't see what you need? Please contact one of our friendly Sales/Technical Representatives and they will be able to assist you with all your Engine Management accessory needs.

Big Stuff 3 1986-1995 Ford Mustang TFI Ignition Harness

Big Stuff 3 1986-1995 Ford Mustang TFI Ignition Harness

Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered! In addition, we offer both universal and application specific engine wiring harnesses, adapter harnesses, and fuel injector harnesses. Don't see what you need? Please contact one of our friendly Sales/Technical Representatives and they will be able to assist you with all your Engine Management accessory needs.

Pages