Products

Pages

AEROvent / CarVent

AEROvent / CarVent

When rapid or vacuum unloading railcars it is necessary to make sure the cars are properly vented in order to avoid disaster and achieve a higher flow capacity. Typically, a hatch cover can be opened but in some situations contamination is a concern. Our AEROVent is an innovative solution to car venting that is typically more cost effective than putting vented covers on the car.
 
AEROvents can be installed on new or existing cars that are not currently vented or have small vents without screens. The vents are equipped with bolt in screens on both the inside of the car, and outside of the vent housing that allow for cleaning or replacement. The bottom side of the vent has a “J” shaped deflector to help eliminate driving rainwater from entering the car.
 
Both bolt on and weld on versions of the vents are available. For sizable orders, this vent is sold as a kit that comes with all the necessary installation hardware, and a drill template for cutting the vent holes on each...

Read more

Aftermarket Replacement Turbocharger - 4828

Aftermarket Replacement Turbocharger - 4828

HP Rating: 400
Precision Turbo and Engine is proud to introduce our line of direct-fit upgrade replacement turbochargers with the unique CEA® (Competition Engineered Aerodynamics) 2618-forged aluminum compressor wheel. These turbochargers are specifically designed to out-perform turbos of the same size from other suppliers while delivering greater efficiency and less turbo lag.
PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 48mm inducer compressor wheel
  • "B" compressor cover 2.8" inlet/2.0" outlet
  • 53.8mm, 76 trim turbine wheel
  • Turbine housing options...
Read more

Aftermarket Replacement Turbocharger - 5128

Aftermarket Replacement Turbocharger - 5128

HP Rating: 450
Precision Turbo and Engine is proud to introduce our line of direct-fit upgrade replacement turbochargers with the unique CEA® (Competition Engineered Aerodynamics) 2618-forged aluminum compressor wheel. These turbochargers are specifically designed to out-perform turbos of the same size from other suppliers while delivering greater efficiency and less turbo lag.
 
PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 51mm inducer compressor wheel
  • Compressor cover options:
       - "B" compressor cover 2.8" inlet/2.0" outlet
       - "E" compressor cover...
Read more

Aftermarket Replacement Turbocharger - 5530

Aftermarket Replacement Turbocharger - 5530

HP Rating: 525
Precision Turbo and Engine is proud to introduce our line of direct-fit upgrade replacement turbochargers with the unique CEA® (Competition Engineered Aerodynamics) 2618-forged aluminum compressor wheel. These turbochargers are specifically designed to out-perform turbos of the same size from other suppliers while delivering greater efficiency and less turbo lag.
 
PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 55mm inducer compressor wheel
  • Compressor cover options:
       - "B" compressor cover 2.8" inlet/2.0" outlet
       - "E" compressor cover...
Read more

Aftermarket Replacement Turbocharger - 6235

Aftermarket Replacement Turbocharger - 6235

HP Rating: 700
Precision Turbo and Engine is proud to introduce our line of direct-fit upgrade replacement turbochargers with the unique CEA® (Competition Engineered Aerodynamics) 2618-forged aluminum compressor wheel. These turbochargers are specifically designed to out-perform turbos of the same size from other suppliers while delivering greater efficiency and less turbo lag.
 
PTE's Direct Replacement Performance Upgrade Turbochargers feature the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Liquid-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 62mm inducer compressor wheel
  • Compressor cover options:
       - "B" compressor cover 2.8" inlet/2.0" outlet
       - "E" compressor cover...
Read more

Aftermarket Spare Parts for Heat Recovery Equipment

Aftermarket Spare Parts for Heat Recovery Equipment

Since Thermal Transfer Corporation's recuperators and heat exchangers have no moving parts, they do not require the customer to maintain an extensive spare parts inventory. However, spare tubes, spare tube bundles, or complete spare units can be provided upon request. Because of the long delivery time typically required to fabricate a recuperator or heat exchanger, we recommend purchasing replacement units in advance so they will be on hand when needed.
 
A spare parts inventory should be maintained for Thermal Transfer Corporation's fired heaters and gas coolers since these products incorporate fans, pumps and electrical components. However, since each design is unique, a customized spare parts list is required for each application. Therefore, standardized spare parts lists are typically not available for our products.

No image

Wabtec Air Brake Valve Repair Kits for Freight Cars

Air Brake Valve Repair Kits

  • ABD
  • ABDX
  • ABDX Vibration Upgrades

No image
No image

Wabtec Air Dryer Units for Transit Cars

Air Dryer Units

The E-1A and E-1A HP Twin-Tower Air Dryer Units used in Wabtec compressors are engineered for high-duty-cycle operation.  These units provide consistently dry air with minimum post-compression air consumption.  Featuring continuous output, this dryer purges one desiccant tower, while the other tower performs the drying cycle.  Components include a spin-off, bead-type desiccant with built in prefilter, a mechanical liquid separator, an R-1 drain valve, a coalescing filter, a main reservoir check valve, an integral thermostat and heater and a control timer.

Wabtec Corp Air Hose Hanger Freight Cars

Air Hose Hanger

Consisting of a five-piece forged and welded unit, the air hose hanger incorporates a ball and socket design that enables the integral 60-degree hose fitting to swing in any direction. Since hose and fittings can move with the coupler, hose kinking, tracking and breaking are reduced. A welding plate attaches completed assemblies to the car. The unit includes a 1 1/4 inch, 60-degree angle fitting for application to cars with long shank couplers and/or sliding center sills. Hangers come in various lengths.

Air Hose Support Cable

Air Hose Support Cable

Air Hose Support Cable (AH22). AAR S-4006 approved. Over 500,000 in service. Quick use carabiner clips make install easy.

Air Hose Support Chain

Air Hose Support Chain

Air Hose Support Chain (CC22). AAR S-4006 approved. Quick use carabiner clips make install easy.

Air Reservoirs

Air Reservoirs

Reservoirs with various volumes, dimensions and connections according to EN and AAR norms. Technical characteristics are in accordance with regulations for high-pressure vessels. EN norms air reservoirs are CE certified.

Wabtec Air Spring system for Transit cars

Air Spring System

Secondary Suspension

Pride Bodies Air Systems

Air Systems

Three Drive Options says it all, solutions for each particular application.   Just give our team a call...

  • VMAC Under Hood Compressors - Light weight, High Performance Air Systems, save on payload space.
  • Hydraulic Driven Air Compressors - Rotary Screw or Reciprocating from 25CFM to 185CFM.
  • Engine Driven Air Compressor - Gas or Diesel Economical Capital Cost.

Air Temperature Sensor

Air Temperature Sensor

Precision Turbo and Engine Air Temperature Sensor. Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered!

Air to Air Intercooler - 1986-1987 Buick Turbo Regal Stock Location Intercooler

Air to Air Intercooler - 1986-1987 Buick Turbo Regal Stock Location Intercooler

Owners of the 1986-1987 Buick Turbo Regals have been raving about this product since the day it was introduced. Made with a high efficiency bar and plate core with 18 flow and 19 cooling rows, this kit comes with cast aluminum end tanks that have been specifically contoured to optimize air flow. Included with the kit is a brand new mandrel bent 3" inlet up pipe, a custom aluminum shroud and all the hoses, clamps, brackets, and mounting hardware for a true direct fit, bolt on installation. Installation instructions included.

Air to Air Intercooler Cores

Air to Air Intercooler Cores

Precision Turbo has been well known for their leadership in heat exchanger products for nearly every application. That same cutting edge technology is yours with this line of air-to-air cores.
 
All of the cores listed below feature bar and plate construction which allows the use of higher boost pressure. This construction is much more resistant to damage from road hazards than tube and fin designs.
 
Use these high efficiency cores with your own end tanks or we can custom fabricate an intercooler to your specifications.

Pages