Products

Pages

Wabtec Corp Freight Products Axle Alternator

Axle Alternator

The Bach-Simpson™ Axle Alternator is designed to translate the rotational speed of a locomotive or transit vehicle wheel and axle into an electrical signal, which represents the linear ground speed of the conveyance. The Axle Alternator is mounted on the locomotive or car truck journal box by means of an adapter and is driven by the axle through a flexible connector or pegbar. The signal produced can be used by speed-actuated devices such as locomotive speed indicators, speed recorders and transition controls.

No image

Axle Mounted Ground Contacts

Axle Mounted Ground Contacts

Wabtec Corp Freight Car Products Axles

Axles

  • Manufactured to AAR M-101 standards
  • Available in rough or finish machined

Wabtec Positive Train Control PTC  Products Back Office Server

Back Office Server

  • Interface to dispatch system
  • High-availability, fault-tolerant, scalable platform
  • Supports software and tracks database updates (mobile device manager
  • Supports train initialization process and interoperability transitions
  • Maintains downloaded on-board system logs
  • Communication server – data radio network(s)
  • Other MIS Systems

Wabtec Power Generation Products Back to Back Engine Mounted

Back to Back Engine Mounted

Engine mounted double bank radiator, suitable for Jacket Water and Low Temperature Aftercooled coolant circuits or Jacket Water and Charge Air cooling circuits

Wabtec Locomotive Products Ball Valve 2-Way

Ball Valve 2-Way

  • 400 WOG
  • Available with standard or locking handle
  • Available with wire ties
  • Vented or non-vented

Features & Benefits

  • Forged brass valves last longer and perform better due to Wabtec's innovative valve design
  • All valves are available with Teflon or Buna seals depending on the material flowing through the valve
  • Most sizes are available in full or standard port sizes
  • Replacement kits are available for valves
  • Special configurations can be produced based on need and usage

Wabtec Locomotive Products Ball Valve 3-Way

Ball Valve 3-Way

  • 200 WOG
  • Available with T or L Port
  • Available w/standard or locking handle
  • Can be manufactured with various pipe threads

Features & Benefits

  • Forged brass valves last longer and perform better due to Wabtec's innovative valve design
  • All valves are available with Teflon or Buna seals depending on the material flowing through the valve
  • Most sizes are available in full or standard port sizes
  • Replacement kits are available for valves
  • Special configurations can be produced based on need and usage

Wabtec Freight Car products Barber Brake Beams

Barber Brake Beams

Formerly known as the Triax, Wabtec's world-class brake beams set the industry standard for quality, durability and innovative design features.

  • Wabtec's Uni-Truss single piece design means there are no welds to fail or fasteners to shear
  • Diagonally corrected end to counteract brake beam rotation provides even pressure across the full face of the brake shoe, protecting against uneven wear 
  • Steel construction for strength and reliability
  • Zero field failures

Wabtec Freight Car Products Barber Integral Iron Wedges

Barber Integral Iron Wedges

Standard Car Truck pioneered the design of variably damped, Barber suspension systems and offers friction wedges to provide optimum damping and wear performance when used in Barber type suspensions. 
Barber Iron Wedges Chart

  • Commonly used on all Barber designed trucks
  • Solid single piece cast iron wedge

Wabtec Freight Car Products Barber Iron Split Wedges

Barber Iron Split Wedges

  • Interchangeable to all Barber Truck designs as a replacement to the traditional single piece wedge
  • Split wedges increase truck warp resistance (squaring) versus traditional single piece wedges, providing improved high speed stability and curving performance without compromising vertical damping

Wabtec Freight Car Products Barber LifeGuard™ Wedge

Barber LifeGuard™ Wedge

Standard Car Truck pioneered the design of variably damped, Barber suspension systems and offers friction wedges to provide optimum damping and wear performance when used in Barber type suspensions.

  • Interchangeable with Barber Truck designs S-2-A, S-2-B, S-2-C, S-2-D, S-2-HD, and S-2-HD-9C as a replacement to the traditional single piece wedge 
  • Polymer faced wedge significantly reduces bolster pocket wear from both the slope surface and side walls to prolong pocket life

The highest deformation temperature of any polymer material, 350°

Wabtec Freight Car Products Barber S2-86® Radial Adapter

Barber S2-86® Radial Adapter

The Barber S2-86® Radial Adapter primary suspension system provides passive semi-radial steering performance. A single layer of rubber bonded between two steel plates and situated above the bearing adapter allows for radial alignment of the wheelsets during curving, which reduces rolling resistance, improving rail and wheel life.

  • M-976 track tested and approved on a variety of trucks
  • Tested and approved under M-924 roller bearing adapter specification
  • Fits standard AAR pedestal - no special side frames required
  • Utilizes standard M-924 features, like the bearing adapter roof recess
  • Durable vulcanized rubber to steel bond
  • Rubber Maintains properties over wider temperature range than other polymers
  • Resilient rubber surface provides better load distribution across pedestal roof discontinuities
  • Grounding wire provides more reliable electrical continuity than studs
  • Rejection lugs prevent...
Read more

Wabtec Freight Products Barber Wedge

Barber TwinGuard™ Wedge

Standard Car Truck pioneered the design of variably damped, Barber suspension systems and offers friction wedges to provide optimum damping and wear performance when used in Barber type suspensions.

  • Interchangeable to all the Barber Truck designs S-2-B, S-2-C, S-2-HD, and S-2-HD-9C as a placement to the traditional single piece wedge
  • Polymer faced wedge significantly reduces bolster pocket wear from both the slope surface and side walls to prolong pocket life

Freight Car Products Barber Side Frame and Bolster Castings

Barber® Side Frame and Bolster Castings

110 T Trucks for M-976 / S-286 Service:

  • S-2-HD 9 Coil (M-976 Approved)
  • S-2-HD 6 Coil – Low Profile (M-976 Approved)
  • S-2-E 917 Integral Wedge (M-976 Approved)
  • S-2-E 945 Split Wedge (S-286 Approved) Other Gross Rail Loads

 Intermodal and Other Service:

  • 125 T S-2-HD
  • 70 T S-2-C

Features / Benefits:

  • Designed and tested by Standard Car Truck to meet or exceed AAR M-202 / 203 Standards
  • Manufactured in AAR M-210 and M-1003 Approved Foundries under Standard Car Truck supervision
  • Inspection / process monitoring exceeds AAR Requirements

    - 100 % Magnetic Particle inspected for cracks (no AAR Requirement)
    - 100 % Gaging (AAR requires sampling only)
    - Detailed Product Quality scoring system

  • 15 year successful service history

Base MOD COP w/LS1 coils Powertrain Management System

Base MOD COP w/LS1 Coils Powertrain Management System

The BigStuff3 GEN3 PRO SEFI Engine Management System is the first programmable Powertrain Control Module for today’s SEFI Coil-on-Plug (COP) engines and electronically controlled transmissions. Offering many unique features that set it apart from the competition, BS3’s EMS uses state of the art technology to help you achieve the best performance possible from your vehicle. When compared to other units on the market, the BigStuff3 EMS's microprocessor ranked consistently higher in speed and performance. Feature-for-feature, the GEN3 system is currently the lowest priced system on the market. Available in a number of configurations, the Big Stuff 3 has a solution for all your fuel injection needs.
 
BigStuff3's Base MOD COP w/LS1 coils Powertrain Management System features the following:

  • Sequential fuel control for 4, 6, and 8 cylinders
  • Data logging with PC in the car only
  • Configurable...
Read more

Batten Bars

Batten Bars

ATP batten bars are a stainless steel formed hat section design that promote strength and superior durability against the elements. This design is also lighter and more rigid than the traditional “C” shaped designs. ATP batten bars are available to fit 20”, 24”, and 30” wide trough systems. Along with trough width, these batten bars have numerous other options including hinge position, hinge pin diameter, and lock tab styles. Food grade and standard gasket are available and all batten bars are shipped with the gasket installed.
 
Call ATP for Further Details

Wabtec Corp Products Battery Charging Systems

Battery Charging Systems

The innovative Solution for High Power Chargers
Increasingly strict regulations to reduce pollution in the cities lead to a rapid change of the infrastructure to electric mobility. These are, for example, charging stations for cars or electric bus terminals.
 
Electric busses ensure for sustainable urban mobility. The retrofitting of bus routes solely driving with electric buses assumes a rapid development. Solutions are, for example, implemented together with local utility companies by rapid charging stations HPC (High Power Charger). Our charging pantograph is a key component of these charging stations.
 
Decades of experience in the development and production of power supplies, such as pantographs for local traffic and high-speed trains, make us a competent supplier for your electric bus terminals.
 
The technically demanding challenges for the specific conditions of electric bus terminals copes our charging pantograph...

Read more

Melett Wabtec westinghouse air brake corportation Bearing Housings

Bearing Housings

Our growing range of bearing housings covers a wide range of turbos. All specialist materials comply with original equipment manufacturers specification to ensure reliable performance.
www.melett.com/product-range/bearing-housings

Wabtec Corp Power Generation Products Belt Drive

Belt Drive

Belt driven radiator, driven directly from the engine. Suitable for Jacket Water and Low Temperature Aftercooled coolant circuits or Jacket Water and Charge Air cooling circuits

Wabtec Corp Power Generation Belt Drive Remote

Belt Drive Remote

Belt driven radiator, driven directly from an electrical motor. Suitable for Jacket Water and Low Temperature Aftercooled coolant circuits or Jacket Water and Charge Air cooling circuits

Pages