Ricerca Prodotti
Pagine
|
0951 Cable ReelsThe professional industrial cable reels for the storing and winding of cables for practically every application, indoors as well as outdoors. The unique construction has been designed to maximize safety, electrical as well as mechanical. The integrated mounting bracket facilitates fast and easy mounting. Above this, the high quality standard of all components guarantees high reliability of the reels.
|
|
1 - Event RecorderMeets and exceeds FRA, IEEE, GM/RT and EEIG crash protection standards |
|
1 Bar MAP SensorPrecision Turbo and Engine 1 Bar MAP Sensor. Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered!
|
|
10" Deep Drawn Brake CylinderAimed at improving our ability to support customer orders with shorter lead times. Wabtec introduced the new universal brake cylinder, available in 10” and 8 1/2” sizes.
|
|
2 Bar MAP SensorPrecision Turbo and Engine 2 Bar MAP Sensor. Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered!
|
|
2.6 x 3 Truck Pulling TurbochargerWhile the 2.6 x 3 is a pure competition charger, some light street use is not out of the question due to the smaller 3” turbine wheel and the T4 footprint. This is a great option for someone who is just getting into pulling and may not have all the supporting mods to run a big charger or someone who wants to drive the truck on the street every once in a while. Keep in mind that an upgraded fuel system is still a must for... |
|
2.6 x 3.6 Truck Pulling TurbochargerThe 2.6 x 3.6 is the largest of the three PTE 2.6 chargers and it makes the most power. Multiple dynos have confirmed that it is a good 60 hp over our competitors’ best product. This is not a street friendly charger and is for high-level competition only. Increased converter stall speed is recommended for automatics to light this charger as well as at least 5,000 rpm off the line for the manuals. The 2.6 x 3.6 is... |
|
2008-2010 Ford Super Duty 6.4L PowerStroke Replacement IntercoolerPrecision Turbo and Engine has spent countless hours working behind the scenes to identify and understand your truck and tractor pulling needs. |
Nessuna immagine |
209 Series Flange Sand TrapsThe 209 Series Flange Sand Traps are designed to provide unrestricted flow of sand to enhance traction between the wheel and rail. The 209 Series Traps are lightweight with a low profile for those under the platform locations and/or on the truck-mounted sandbox typically found on an industrial type locomotive or light rail vehicle. Horizontal or vertical outlets make it possible to locate the trap with a minimal length of sand hose.... |
|
24 Tooth Wheel with 3/4'' HED Pickup for Big Stuff 324 Tooth Wheel with 3/4'' HED Pickup for Big Stuff 3. Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered!
|
|
24-A Double Check ValveAllows air flow from one of two separate sources to a common point of use without either of the two sources being connected to each other.
|
|
2500 DJ Slack AdjusterWabtec designs and manufactures self-adjusting slack adjusters.
|
|
26 C Brake ValveProvides air brake control of the locomotive and the train
|
|
26-F Control Valve
|
|
273 Series Sand TrapGW traps are designed to provide unrestricted flow of sand to a point between the rail and wheel to enhance traction. Several models of traps are available with adjustable or fixed sand delivery features to meet your operating needs.
|
|
277 Series Sand Trap with Rotary Shut-OffThe 277-2 Sand Trap and Controller with Rotary Shut-Off remains the industry standard for uniform sanding to enhance locomotive traction. The 277-2 Sand Trap is designed with a unique adjustment feature that determines the amount of sand delivered to the point of contact between the rail and wheel interface. By using an Allen wrench to adjust the integral paddle, the sand delivery can be adjusted from a "LO" setting... |
|
2CD™ Compressor
|
|
2CL and 4CL Oil-free CompressorsWabtec offers 2CL and 4CL oil-free compressors that help address environmental regulations. The reciprocating, two-cylinder unit has a dry aluminum crankcase. One low-pressure cylinder supplies a single high-pressure cylinder through an intercooler mounted alongside the aftercooler. All wearing parts incorporate pre-lubricated sealed bearings and polymer rings that do not require lubrication.
|
|
3 Bar MAP SensorPrecision Turbo and Engine 3 Bar MAP Sensor. Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered!
|
|
3 Bar MAP Sensor Connector KitPrecision Turbo and Engine 3 Bar MAP Sensor Connector Kit. Precision Turbo carries a full line of accessories for both Big Stuff 3 Engine Management Systems and AEM Engine Management Systems. Everything from air inlet temp sensors to coolant temp sensors, to throttle position sensors and MAP sensors; we have you covered!
|