Freight Car Market Products

Pages

westinghouse air brake tech Gate Adapter Flanges

Gate Adapter Flanges

These adapter flanges weld on the bottom of the car hopper creating a bolting surface for the outlet gate application. These flanges are utilized on new car builds, repair and maintenance projects, and to convert old weld on style hoppers to bolt on flanges. Numerous sizes, shapes, and bolt hole configurations are available.
 
ATP also offers “Adapter Adapters”. These have two different bolt hole patterns and work points on each side of the flange making it possible to convert an odd size bolting flange (such as a plastic pellet car) to a more common size. This avoids the high cost of developing a new gate for small groups of cars, and creates a larger number of gate options when the bolting flange is a more common size.
 
Call ATP for Further Details

westinghouse air brake tech Gate Gasket

Gate Gasket

ATP supplies outlet gate gaskets in a couple different sizes and hole patterns to meet your needs. These gaskets are applied on top of the gate bolting flange and insure a good seal between this flange and the mating flange of the car hopper.
 
Current Available Sizes
13” x 42” – 32 Bolt Hole Pattern13” x 42” – 64 Bolt Hole Pattern30” x 30” – 66 Bolt Hole Pattern
 
Call ATP for Further Details

air brake company Gate-Systems 13×42 Low Profile (A87)

Gate Systems 13×42 Low Profile (A87)

The A87 low profile outlet gate is commonly referred to in the industry as a 13” x 42” sand gate.  With an opening size of 21” x 54” this gate is available in either 32 or 64 bolt hole pattern designs.  Along with the standard AEROgate features, an under door seal is applied to this gate in order to prevent “back puffing” when unloading.  Additional options are available.
 
This gate was originally designed as a low profile gate for some sand applications.  Its low profile design allows for lateral conveyor unloaded at remote facilities.  We would also recommend the A161 for these low profile sand and frac sand applications.
 
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • Sand
  • Various Fine/Heavy Commodities

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
        - Drastically Reduces Doorplate Wear
        - Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
        - Allow Smooth Commodity Flow over Hopper Surfaces
        - Simplifies the Hopper Cleaning Process with No Surface Restrictions.
  • Download AEROgate Features PDF for in-depth details.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • Stainless Steel Construction
  • Various Powdercoat Options and Colors including but not limited to:
        - BRN – Brown (Federal Standards Color Code: 10076)
        - GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
        - TGY – Tan/Grey (Federal Standards Color Code: 26559)
        - TAN – Tan(Federal Standards Color Code: 13711)
        - CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  13” x 42”
  • Bolt-On Working Points: 27-1/4” x 62-7/8”
  • Actual Gate Opening Size: 21” x 54” (w/ 3, 6” hoods)
  • Bottom Frame Opening: 24-1/2” x 59”
  • Overall Gate Height: 6-7/8”
  • Number of Bolt Holes: 32 or 64 Holes
  • Weight: 565 lbs.
  • Centerline of Gate to End of Open Door Plate: 43.364”

air brake company Gate-Systems 13×42 Replacement (W20)

Gate Systems 13×42 Replacement (W20)

The W20 WorXgate is a weld-on, automatic locking, and low cost replacement for older generation gates. Manual locking gates were typically used on older hopper cars and if these manual locks are not disengaged before a power gate opener is used, it can destroy these older gates. The W20 is an economical solution for replacing these older manual locking gates.
 
This W20 is based on the simple side and front ledge design that was highly popular on older outlet gates. These ledge style gates do not have seals, but do come equipped with automatic inertia locks and high strength drive components.
 
These gates can be simpler to install because of their extended wings. Having these extended wings eliminates the labor and skill required to try and cut the existing gate off the car without damaging the portion of the hopper that extends inside the gate. To install this W20 gate the old gates can be cut off above the existing weld seam. The hopper on the car is shortened, but the extended hopper wings will make up for this and should weld right into place.This gate is also a direct replacement gate, so if it is a requirement to salvage the current length of hopper, this can be done. The W20 gate hopper angles typically match the car hopper angles, and the bottom opening of the gate is usually around 15% larger than the original gates.
 
Recommended Commodities:Grain

  • Grain

Call ATP for Further Details
 
Features:

  • Weld-On
  • Automatic Inertia Lock
  • Low Cost
  • High Strength Drive Components
  • Adjustable Weld Flanges (Wings)
  • Liquid Painted

Additional Options:

  • Brown or Gray Liquid Painted.

Technical Specifications:

  • Industry Size Reference:  13” x 42”
  • New Work Points: 30” x 65-5/8”
  • Actual Gate Opening Size: 14-13/16” x 42-7/8”
  • Bottom Frame Opening: 14-13/16” x 42-7/8”
  • Overall Gate Height From Work Points: 10-31/32”
  • Weight: 32 or 64 Holes: 356 lbs.
  • Centerline of Gate to End of Open Door Plate: 27-1/2”

air brake company Gate Systems 13×42 Standard (A74)

Gate Systems 13×42 Standard (A74)

- The A74 outlet gate is commonly referred to in the industry as a 13” x 42” cement gate. With an opening size of 13” x 40” this gate is available in either 32 or 64 bolt hole pattern designs. Along with the standard AEROgate features, an under door seal is applied to this gate in order to prevent “back puffing” when unloading. Additional options are available
 
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • Cement
  • Various Fine/Heavy Commodities
  • Fertilizer (Stainless Steel Version)
  • Salt (Stainless Steel Version)

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
        - Drastically Reduces Doorplate Wear
        - Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
       - Allow Smooth Commodity Flow over Hopper Surfaces
        - Simplifies the Hopper Cleaning Process with No Surface Restrictions.
  • Download AEROgate Features PDF for in-depth details.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • Stainless Steel Construction
  • Various Powdercoat Options and Colors including but not limited to:
        - BRN – Brown (Federal Standards Color Code: 10076)
        - GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
        - TGY – Tan/Grey (Federal Standards Color Code: 26559)
        - TAN – Tan(Federal Standards Color Code: 13711)
        - CGY – Light Grey
  • Special bottom gate frames available for boot up adaptor unloading applications.

Technical Specifications:

  • Industry Size Reference:  13” x 42”
  • Bolt-On Working Points: 27-1/4” x 62-7/8”
  • Actual Gate Opening Size: 13” x 40”
  • Bottom Frame Opening: 16-1/2” x 45”
  • Overall Gate Height: 10-1/2”
  • Number of Bolt Holes: 32 or 64 Holes
  • Weight: 460 lbs.
  • Centerline of Gate to End of Open Door Plate: 29.054”

westinghouse air brake tech Gate Systems 13x42 Universal (A161)

Gate Systems 13x42 Universal (A161)

- The A161 StepDrive outlet gate is commonly referred to in the industry as a 13” x 42” universal/sand cement gate. With an opening size of 13” x 40”, this gate is available in either 32 or 64 bolt hole pattern designs. Along with the standard AEROgate features, an under door seal is applied to this gate in order to prevent “back puffing” when unloading.
 
This is patented gate design is highly innovative and operates with a step doorplate design known as the StepDrive. The StepDrive allows the drive components to be moved vertically upward, creating a low profile gate with a smaller bottom opening. The major benefit of all this is that the smaller bottom opening can be used in cement service, while the shallow gate depth is perfect for frac sand lateral conveyor unloading facilities.
 
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • Frac Sand
  • Cement
  • Sand
  • Various Fine/Heavy Commodities

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
        - Drastically Reduces Doorplate Wear
        - Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
        - Allow Smooth Commodity Flow over Hopper Surfaces
        - Simplifies the Hopper Cleaning Process with No Surface Restrictions.
  • Download AEROgate Features PDF for in-depth details.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2U.S. 8,850,991
 
Additional Options: 

  • Various Powdercoat Options and Colors including but not limited to:
        - BRN – Brown (Federal Standards Color Code: 10076)
        - GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
        - TGY – Tan/Grey (Federal Standards Color Code: 26559)
        - TAN – Tan(Federal Standards Color Code: 13711)
        - CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  13” x 42”
  • Bolt-On Working Points: 27-1/4” x 62-7/8”
  • Actual Gate Opening Size: 13” x 40” (w/ 1, 6” Hood)
  • Bottom Frame Opening: 16-1/2” x 45”
  • Overall Gate Height: 6-7/8”
  • Number of Bolt Holes: 32 or 64 Holes
  • Weight: 515 lbs.
  • Centerline of Gate to End of Open Door Plate: 47.304”

westinghouse air brake tech Gate Systems 13×42 Vac/Grav (A113 PVC)

Gate Systems 13x42 Vac/Grav (A113 PVC)

The A113 Perimeter Vacuum Chamber (PVC) outlet gate is commonly referred to in the industry as a 13” x 42” low profile, vacuum-gravity gate. With an opening size of 13” x 40” this gate is available with a 32 or 64 bolt hole pattern design. Along with the standard AEROgate features, additional options are available, such as various nozzle cap versions.
 
This A113 PVC outlet gate combines the simplicity of a single door gravity outlet gate and the vacuum unloading capabilities of a pneumatic outlet gate. Eliminating one doorplate creates an overall gate height of 10-1/2”, reduces costs, and allows then end user to boot directly to the gate and begin unloading without wasting time throttling top doorplates when vacuum unloading. Also, when the doorplate is in the open position, the vacuum chamber is easily accessible for cleaning purposes.
 
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • Malt
  • Rice
  • Various other light, dry, non-clumping commodities

Contact ATP for Further Details
 
Features:

  • Bronze Glide Rails:
        - Drastically Reduces Doorplate Wear
        - Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
        - Allow Smooth Commodity Flow over Hopper Surfaces
        - Simplifies the Hopper Cleaning Process with No Surface Restrictions.
  • Download AEROgate Features PDF for in-depth details.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2U.S. 8,371,235
 
Additional Options: Various Powdercoat Options and Colors including but not limited to:

  • Stainless Steel Construction
  • Rear Wiper Seals
  • Several Nozzle Cap Options
  • Various Powdercoat Options and Colors including but not limited to:
        - Food Grade Powder coat
        - BRN – Brown (Federal Standards Color Code: 10076)
        - GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
        - TGY – Tan/Grey (Federal Standards Color Code: 26559)
        - TAN – Tan(Federal Standards Color Code: 13711)
        - CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  13” x 42”
  • Bolt-On Working Points: 27-1/4” x 62-1/8”
  • Actual Gate Opening Size: 13” x 40”
  • Bottom Frame Opening: 24-1/2” x 59”
  • Overall Gate Height: 10-1/2”
  • Number of Bolt Holes: 32 or 64 Holes
  • Weight: 725 lbs.
  • Centerline of Gate to End of Open Door Plate: 40.864”
  • Vacuum Chamber Cutout Pattern: 1” x 2” Rectangular Cutouts (10 each)
  • Vacuum Nozzle Diameter: 6” I.D. / 6-1/4” O.D.

westinghouse air brake tech Gate-Systems 21×54 Special (A113)

Gate Systems 21x54 Special (A113)

The A113 outlet gate is commonly referred to in the industry as a 13” x 42” plastic pellet conversion gate that will convert older plastic pellet cars to DDG service. With an opening of 21” x 54” this gate is available in two different work point sizes with 38 bolt holes. This AEROgate is typically used to convert pneumatically unloaded plastic pellet cars to a gravity unloading process for DDG. Along with the standard AEROgate features, additional options are available.
 
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • DDG
  • Various Light Commodities

 
Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
        - Drastically Reduces Doorplate Wear
        - Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
        - Allow Smooth Commodity Flow over Hopper Surfaces
        - Simplifies the Hopper Cleaning Process with No Surface Restrictions.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • Y38 A Bolting Flange: 29-13/16” x 75-13/16”Center Line
  • Y38 B Bolting Flange: 28-5/16” x 74-5/16” Center Line
  • Various Powder Coat Options and Colors including but not limited to:
        - BRN – Brown (Federal Standards Color Code: 10076)
        - GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
        - TGY – Tan/Grey (Federal Standards Color Code: 26559)
        - TAN – Tan(Federal Standards Color Code: 13711)
        - CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  13” x 42”
  • Bolt-On Working Points: Y38-A: 29-13/16” x 75-13/16”  |   Y38-B: 28-5-16” x 74-5/16”
  • Actual Gate Opening Size: 21” x 54”
  • Bottom Frame Opening: 24-1/2” x 59”
  • Overall Gate Height: 9”
  • Number of Bolt Holes: 38 Holes
  • Weight: 548 lbs.
  • Centerline of Gate to End of Open Door Plate: 40.864”

westinghouse air brake tech Gate Systems 24×30 Replacement (W10)

Gate Systems 24×30 Replacement (W10)

The W10 WorXgate is a weld-on, automatic locking, low cost replacement for older generation gates. Manual locking gates were typically used on older hopper cars and if these manual locks are not disengaged before a power gate opener is used, it can destroy these older gates. The W10 is an economical solution for replacing these older manual locking gates.
 
This W10 is based on the simple side and front ledge design that was highly popular on older outlet gates. These ledge style gates do not have seals, but do come equipped with automatic inertia locks and high strength drive components.
 
These gates are simpler and easier to install because of their extended wings. Having these extended wings eliminates the labor and skill required to try and cut the existing gate off the car without damaging the portion of the hopper that extends inside the gate. To install this W10 gate the old gates must be cut off above the existing weld seam at the specified location (Typically 1” above the existing weld seam). The hopper on the car is shortened, but the extended hopper wings will make up for this and should weld right into place.
 
Cutting the original gates off above the weld flange forms a shorter car hopper, creating the foundation for the W10 design. Shorter car hoppers allow for shallower gate hopper angles below the car attachment point that create a smaller gate frame and doorplate. This doorplate and frame use less material and contribute to the extreme economies of this gate. Also, the smaller doorplate design is still typically larger than the original gates.
 
Recommended Commodities:

  • Grain

Call ATP for Further Details
 
Features:

  • Weld-On
  • Automatic Inertia Lock
  • Low Cost
  • High Strength Drive Components
  • Adjustable Weld Flanges (Wings)
  • Liquid Painted

Additional Options: 

  • Brown or Gray Liquid Painted.

Technical Specifications:

  • Industry Size Reference:  24” x 30”
  • Bolt-On Working Points: 40-5/8” x 38-5/8”
  • Actual Gate Opening Size: 37-1/8” x 35-1/8”
  • Bottom Frame Opening: 28-7/16” x 25-7/8”
  • Overall Gate Height: 7-1/8”
  • Number of Bolt Holes: 32 or 64 Holes
  • Weight: 275 lbs.
  • Centerline of Gate to End of Open Door Plate: 47”

westinghouse air brake tech Gate Systems 24x30 Replacement (W15)

Gate Systems 24x30 Replacement (W15)

The W15 WorXgate is a weld-on, automatic locking, and low cost replacement for older generation gates. Manual locking gates were typically used on older hopper cars and if these manual locks are not disengaged before a power gate opener is used, it can destroy these older gates. The W15 is an economical solution for replacing these older manual locking gates.
 
This W15 is based on the simple side and front ledge design that was highly popular on older outlet gates. These ledge style gates do not have seals, but do come equipped with automatic inertia locks and high strength drive components.
 
These gates can be simpler to install because of their extended wings. Having these extended wings eliminates the labor and skill required to try and cut the existing gate off the car without damaging the portion of the hopper that extends inside the gate. To install this W15 gate the old gates can be cut off above the existing weld seam. The hopper on the car is shortened, but the extended hopper wings will make up for this and should weld right into place.This gate is also a direct replacement gate, so if it is a requirement to salvage the current length of hopper, this can be done. The W15 gate hopper angles typically match the car hopper angles, and the bottom opening of the gate is usually around 15% larger than the original gates.
 
Recommended Commodities:

  • Grain

Call ATP for Further Details
 
Features:

  • Weld-On
  • Automatic Inertia Lock
  • Low Cost
  • High Strength Drive Components
  • Adjustable Weld Flanges (Wings)
  • Liquid Painted

Additional Options: 

  • Brown or Gray Liquid Painted.

Technical Specifications:

  • Industry Size Reference:  24” x 30”
  • New Work Points: 31-1/2” x 39-1/2”
  • Actual Gate Opening Size: 19-13/16” x 27-1/4”
  • Bottom Frame Opening: 19-13/16” x 27-1/4”
  • Overall Gate Height: 7-11/16”
  • Weight: 249 lbs.
  • Centerline of Gate to End of Open Door Plate: 35-1/2”

westinghouse air brake tech Gate Systems 24x48 Standard (A71)

Gate Systems 24x48 Standard (A71)

The A71 outlet gate is commonly referred to in the industry as a 13” x 42” DDG gate.  With an opening size of 24” x 48” this gate is available in both a 32 or 64 bolt hole pattern, while bolting to a 13” x 42” nominal bolting flange.  Typically ATP recommends this gate to convert pneumatically unloaded plastic pellet cars to a gravity unloading process for DDG service.  Along with the standard AEROgate features, additional options are available.
 
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • DDG
  • Light, clumping commoditie

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
        - Drastically Reduces Doorplate Wear
        - Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
        - Allow Smooth Commodity Flow over Hopper Surfaces
        - Simplifies the Hopper Cleaning Process with No Surface Restrictions.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • 32 or 64 Bolt Hole Patterns
  • Various Powder Coat Options and Colors including but not limited to:
        - BRN – Brown (Federal Standards Color Code: 10076)
        - GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
        - TGY – Tan/Grey (Federal Standards Color Code: 26559)
        - TAN – Tan(Federal Standards Color Code: 13711)
        - CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  24” x 48”
  • Bolt-On Working Points: 27-1/4” x 62-7/8”
  • Actual Gate Opening Size: 24” x 48”
  • Bottom Frame Opening: 27-1/2” x 52”
  • Overall Gate Height: 10-1/2”
  • Number of Bolt Holes: 32 or 64 Holes
  • Weight: 533 lbs.
  • Centerline of Gate to End of Open Door Plate: 45-1/2”

westinghouse air brake tech Gate Systems 30×30 Low Profile (A133)

Gate Systems 30×30 Low Profile (A133)

The A133 outlet gate is commonly referred to in the industry as a 30” x 30” low profile gate. With an opening size of 38” x 36”, this gate is available with a bolting hole pattern of 66 holes. Along with the standard AEROgate features, additional options are available.
 
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • Grain

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
        - Drastically Reduces Doorplate Wear
        - Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
        - Allow Smooth Commodity Flow over Hopper Surfaces
        - Simplifies the Hopper Cleaning Process with No Surface Restrictions.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • Various Powdercoat Options and Colors including but not limited to:
        - BRN – Brown (Federal Standards Color Code: 10076)
        - GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
        - TGY – Tan/Grey (Federal Standards Color Code: 26559)
        - TAN – Tan(Federal Standards Color Code: 13711)
        - CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  30” x 30”
  • Bolt-On Working Points: 45-3/8” x 43-3/8”
  • Actual Gate Opening Size: 38” x 36” (1 Hood)
  • Bottom Frame Opening: 41-1/2” x 40”
  • Overall Gate Height: 7-1/2”
  • Number of Bolt Holes: 66 Holes
  • Weight: 590 lbs.
  • Centerline of Gate to End of Open Door Plate: 69-1/16”

westinghouse air brake tech Gate Systems 30×30 S-Series (A139)

Gate Systems 30×30 S-Series (A139)

The A87 low profile outlet gate is commonly referred to in the industry as a 13” x 42” sand gate.  With an opening size of 21” x 54” this gate is available in either 32 or 64 bolt hole pattern designs.  Along with the standard AEROgate features, an under door seal is applied to this gate in order to prevent “back puffing” when unloading.  Additional options are available.
 
This gate was originally designed as a low profile gate for some sand applications.  Its low profile design allows for lateral conveyor unloaded at remote facilities.  We would also recommend the A161 for these low profile sand and frac sand applications.
 
Click here for the industry leading 7 year written warranty for all S-Series gates.
 
Recommended Commodities:

  • Grain

Call ATP for Further Details
 
Features:

  • 10ga Steel Construction
  • ¼” Thick Doorplate
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • 3 Steel Door Glide Rails
  • 80 lbs. lighter than the Standard Grain Gate (A73)

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • Various Powdercoat Options and Colors including but not limited to:
        - BRN – Brown (Federal Standards Color Code: 10076)
        - GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
        - TGY – Tan/Grey (Federal Standards Color Code: 26559)
        - TAN – Tan(Federal Standards Color Code: 13711)
        - CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  30” x 30”
  • Bolt-On Working Points: 45-3/8” x 43-3/8”
  • Actual Gate Opening Size: 30” x 28”
  • Bottom Frame Opening: 33-1/2” x 32”
  • Overall Gate Height: 10”
  • Number of Bolt Holes: 66 Holes
  • Weight: 390 lbs.
  • Centerline of Gate to End of Open Door Plate: 54.736”

westinghouse air brake tech Gate Systems 30×30 Vac/Grav (A83 PVC)

Gate Systems 30×30 Vac/Grav (A83 PVC)

The A83 Perimeter Vacuum Chamber (PVC) outlet gate is commonly referred to in the industry as a 30” x 30” low profile, vacuum-gravity gate.  With an opening size of 30” x 28” this gate is available with a 66 bolt hole pattern design.  Along with the standard AEROgate features, additional options are available such as various nozzle cap versions.
 
This A83 PVC outlet gate combines the simplicity of a single door gravity outlet gate and the vacuum unloading capabilities of a pneumatic outlet gate.  Eliminating one doorplate creates an overall gate height of 10”, reduces costs, and allows then end user to boot directly to the gate and begin unloading without wasting time throttling top doorplates when vacuum unloading.  Also, when the doorplate is in the open position, the vacuum chamber is easily accessible for cleaning purposes.
 
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • Malt
  • Rice

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
        - Drastically Reduces Doorplate Wear
        - Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
    - Allow Smooth Commodity Flow over Hopper Surfaces
    - Simplifies the Hopper Cleaning Process with No Surface Restrictions.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2U.S. 8,371,235
 
Additional Options: 

  • Stainless Steel Construction
  • Rear Wiper Seals
  • Various Powdercoat Options and Colors including but not limited to:
        - Food Grade Powder coat
        - BRN – Brown (Federal Standards Color Code: 10076)
        - GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
        - TGY – Tan/Grey (Federal Standards Color Code: 26559)
        - TAN – Tan(Federal Standards Color Code: 13711)
        - CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  30” x 30”
  • Bolt-On Working Points: 45-3/8” x 43-3/8”
  • Actual Gate Opening Size: 43” x 39”
  • Bottom Frame Opening: 46-1/2” x 42”
  • Overall Gate Height: 10”
  • Number of Bolt Holes: 66 Holes
  • Weight: 780 lbs.
  • Centerline of Gate to End of Open Door Plate: 73.732”
  • Vacuum Chamber Cutout Pattern: 1” x 2” Rectangular Cutouts (10 each)
  • Vacuum Nozzle Diameter: 6” I.D. / 6-1/4” O.D.

westinghouse air brake tech Gate Systems 30×30 Vac/Grav (AV27)

Gate Systems 30×30 Vac/Grav (AV27)

The AV27 outlet gate is commonly referred to in the industry as a 30” x 30” stainless steel vacuum-gravity gate. With an opening size of 30” x 28” this gate is available with a bolting hole pattern of 66 holes.
 
This AV27 outlet gate was originally designed for the sugar industry. Its dual gate slide design produces a sanitary plenum chamber for boot up gravity unloading equipment, while vacuum nozzles allow for pneumatic unloading applications. The gate frame is clearly marked with door throttling positions and when throttling to the appropriate positions, commodity falls over the edge of the top door slide breaking up large clumps and effectively emptying the hopper. Also, when the doorplates are in the open position, the vacuum chamber is visible and easily accessible for cleaning purposes.
Click here for AV27 gate unloading instructions.
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • Sand
  • Various Fine/Heavy Commodities

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
    • Drastically Reduces Doorplate Wear
    • Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
    • Allow Smooth Commodity Flow over Hopper Surfaces
    • Simplifies the Hopper Cleaning Process with No Surface Restrictions.
  • Download AEROgate Features PDF for in-depth details.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • Stainless Steel Construction
  • Various Powdercoat Options and Colors including but not limited to:
    • BRN – Brown (Federal Standards Color Code: 10076)
    • GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
    • TGY – Tan/Grey (Federal Standards Color Code: 26559)
    • TAN – Tan(Federal Standards Color Code: 13711)
    • CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  13” x 42”
  • Bolt-On Working Points: 27-1/4” x 62-7/8”
  • Actual Gate Opening Size: 21” x 54” (w/ 3, 6” hoods)
  • Bottom Frame Opening: 24-1/2” x 59”
  • Overall Gate Height: 6-7/8”
  • Number of Bolt Holes: 32 or 64 Holes
  • Weight: 565 lbs.
  • Centerline of Gate to End of Open Door Plate: 43.364”

westinghouse air brake tech Gate Systems 30x30 Standard (A73)

Gate Systems 30x30 Standard (A73)

The A73 outlet gate is commonly referred to in the industry as a 30” x 30” grain gate. With an opening size of 30” x 28” this gate is available with a 66 bolt hole pattern or a weld on design. Along with the standard AEROgate features, additional options are available, such as a low profile version.
 
Click here for the industry leading 10 year written warranty for all AEROgates.
 
Recommended Commodities:

  • Grain
  • Fertilizer (Stainless Steel Version)
  • Salt (Stainless Steel Version)

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
    • Drastically Reduces Doorplate Wear
    • Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
    • Allow Smooth Commodity Flow over Hopper Surfaces
    • Simplifies the Hopper Cleaning Process with No Surface Restrictions.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • Low Profile Version (9” Overall Gate Height)
  • Weld on Version
  • Stainless Steel Construction
  • Various Powder Coat Options and Colors including but not limited to:
    • BRN – Brown (Federal Standards Color Code: 10076)
    • GRY – Medium Grey (Federal Standards Color Code: 26314)
    • TGY – Tan/Grey (Federal Standards Color Code: 26559)
    • TAN – Tan(Federal Standards Color Code: 13711)
    • CGY – Light Grey
  • UDS – Under Door Seal to prevent “Back Puffing” when unloading.

Technical Specifications:

  • Industry Size Reference:  30” x 30”
  • Bolt-On Working Points: 45-3/8” x 43-3/8”
  • Actual Gate Opening Size: 45-3/8” x 43-3/8”
  • Bottom Frame Opening: 33-1/2” x 32”
  • Overall Gate Height: 10”
  • Number of Bolt Holes: 66 Holes
  • Weight: 472 lbs.
  • Centerline of Gate to End of Open Door Plate: 54.74”

Gate Systems 42x42 Standard (A83)

Gate Systems 42x42 Standard (A83)

The A83 outlet gate is commonly referred to in the industry as a 42” x 42” DDG gate.  With an opening size of 43” x 39” this gate is available in a 66 bolt hole pattern design. Along with the standard AEROgate features, additional options are available, such as a low profile version.
 
Click here for the industry leading 10-year written warranty for all AEROgates.
 
Recommended Commodities:

  • DDG

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
    • Drastically Reduces Doorplate Wear
    • Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
    • Allow Smooth Commodity Flow over Hopper Surfaces
    • Simplifies the Hopper Cleaning Process with No Surface Restrictions

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • Low Profile Version (8-1/2” Overall Gate Height)
  • Stainless Steel Construction
  • Various Powdercoat Options and Colors including but not limited to:
    • BRN – Brown (Federal Standards Color Code: 10076)
    • GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
    • TGY – Tan/Grey (Federal Standards Color Code: 26559)
    • TAN – Tan(Federal Standards Color Code: 13711)
    • CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  42” x 42”
  • Bolt-On Working Points: 45-3/8” x 43-3/8”
  • Actual Gate Opening Size: 43” x 39”
  • Bottom Frame Opening: 43-1/2” x 42”
  • Overall Gate Height: 10”
  • Number of Bolt Holes: 66 Holes
  • Weight: 611 lbs.
  • Centerline of Gate to End of Open Door Plate: 73.732”

westinghouse air brake tech Gate Systems 43×54 Standard (A127)

Gate Systems 43×54 Standard (A127)

The A127 outlet gate is commonly referred to in the industry as a 43” x 54” DDG gate. With an opening size of 43” x 54” this gate is available with a bolting hole pattern of 60 holes. Along with the standard AEROgate features, additional options are available.
 
Click here for the industry leading 10-year written warranty for all AEROgates.
 
Recommended Commodities:

  • DDG
  • Other Light Commodities

Call ATP for Further Details
 
Features:

  • Bronze Glide Rails:
    • Drastically Reduces Doorplate Wear
    • Contributes to a Lower Operating Torque
  • Automatic Overhead Inertia Lock
  • High Endurance UHMW Wiper Seals
  • No Ledges or Areas for Commodity to Build Up
  • Countersunk Seal Bolts in Gate Hopper:
    • Allow Smooth Commodity Flow over Hopper Surfaces
    • Simplifies the Hopper Cleaning Process with No Surface Restrictions.

Patent Numbers:U.S. 7,171,907 B2U.S. 7,367,271 B2
 
Additional Options: 

  • Stainless Steel Construction
  • Various Powdercoat Options and Colors including but not limited to:
    • BRN – Brown (Federal Standards Color Code: 10076)
    • GRY – Medium Grey (Federal Standards Color Code: 26314) ATP Standard Stocked Color
    • TGY – Tan/Grey (Federal Standards Color Code: 26559)
    • TAN – Tan(Federal Standards Color Code: 13711)
    • CGY – Light Grey

Technical Specifications:

  • Industry Size Reference:  43” x 54”
  • Bolt-On Working Points: 58” x 69”
  • Actual Gate Opening Size: 43” x 54”
  • Bottom Frame Opening: 46-1/2” x 58”
  • Overall Gate Height: 10”
  • Number of Bolt Holes: 60 Holes
  • Weight: 830 lbs.
  • Centerline of Gate to End of Open Door Plate: 73.732”

westinghouse air brake tech GE Type B, CO, CD Holders

GE Type B, CO, CD Holders

GE Type B, CO, CD Holders

westinghouse air brake technologies corporation company WestRail Side

Gondola Parts

Available Parts:

  • Side stakes and bolster posts
  • End posts
  • Corner posts
  • Side sills
  • Top chords
  • End chords
  • Interior braces and brackets
  • Wing sheets
  • End sheets
  • Slope sheets
  • Tub straps
  • Floor sheets
  • Drain hold cover
  • Tub end and clips

Side sheet repair can be accomplished using our custom side sheet splices and backing.
 
Tub ends are available but are not an OEM direct fit.
 
Tub repair solutions are in development.
 
Tub repair for the Bethgon is available by utilizing our Stub Tub product. Stub Tubs are available in three different lengths and can be combined with a center section to replace an entire tub. Side sheet repair can be accomplished using our custom side sheet splices and backing.
 
Current Models Mapped:

  • AeroFlo
  • Aluminator
  • BethGon
  • BethGon 2
  • MaxGon

Pages