Transit Car Market Products

Pages

Wabtec Transit Car Products Brake Pads

Brake Pads

FIP manufactures composite brake pads for the transit sector. With many friction materials available and a full scale Dynanometer for testing, FIP can find the right friction material for the customer's specific application.

Brush Holder Springs

Brush Holder Springs and Assemblies

It takes quality brush holder springs, spring assemblies, and pressure finger assemblies to keep brush holders operating efficiently. Whether we duplicate your design or engineer an enhanced assembly, Fulmer Company manufactures a variety of products that maximize performance.

  • Wire Torsion Springs
  • Extension Springs
  • Compression Springs
  • Flat Wire Clock Springs
  • Leaf Springs
  • Constant Force Springs
  • Spring Assemblies
  • Pressure Finger Assemblies
  • Brush Wear Indicators

Materials capabilities include all alloys from carbon and stainless steel to phosphorous bronze and beryllium copper. For more information, please contact us.

Brush Holders by Gerken Group

Brush Holders

High quality, engineered brush-holders and replacement spring units for railway, industrial, power generation and wind energy applications.
 
Designed and manufactured for long, reliable service in the most arduous applications.

Wabtec Transit Car Products Buffer

Buffer

Secondary Suspension

No image

Buzzer

Audible Warning Device for ADA or other.

Carbon Brushes PanTrac Wabtec Company

Carbon Brushes

Carbon brushes for rotating equipment in railways, industry and power generation, including wind energy.
 
A huge range of grades proven in the most demanding applications.

Carbon Strips Wabtec Pantrac Products

Carbon Strips

Carbon strips for pantographs. Manufactured to the highest standards by Pantrac, our key manufacturing location in Germany. The preferred choice for leading rail systems worldwide. Our materials are proven to give long-life and reliable performance.
 

  • Low wear on the carbon material and overhead line
  • High-current carrying capacity and high temperature resistance
  • Lead-free metal impregnation of the coal marks for high and very high current loads (RH 84M6, RH 83M6, RH 85M6)
  • Connection between carbon profile and Al carrier by means of an electrically conductive adhesive
  • Electrically conducting adhesive connection temperature-resistant up to 250 ° C
  • Tested with short-circuit current of 30kA (half-wave 16 2/3 Hz)
  • Reliable automatic lowering system (ADD)
  • Reliable quality control (according to EN 50405)

No image

Carbons

Carbons

Wabtec Corp Products Cast Iron Insert Brake Block

Cast Iron Insert Brake Block

FIP manufactures a cast iron INSERT block used for removing minor defects as well as roughening the wheel to improve wheel to rail adhesion. The friction material surrounding the cast iron insert is a composite friction material.

Wabtec Transit Car Products CCRDK Compact Calipers

CCRDK Compact Calipers

This unit employs wedge force amplification and a very compact caliper design for high braking force in a compact installation.  The CCRDK uses rugged and proven technology at the component level and meets contemporary demands through refined layout and caliper design.  The unit is available for wheel- and axle-mounted disc installations and has a built-in spring parking brake and slack adjuster.

No image

CCTV System

To improve the safety of passengers and personnel, ANNAX offers a CCTV system of surveillance cameras and video recorders which can be integrated into the PIS.
 
The interior of the vehicle, sites of emergency and scenes of fires, as well as passengers using the emergency communication units can be observed by train personnel and staff at the land-based control centre. IP-cameras are used as surveillance cameras. The footage of the cameras is transmitted via Ethernet to video recorders for storage and displays in the OCC or the driver cab for live observation. To record the footage, ANNAX offers the recorders NVR 33 and NVR 16, as well as unique software developed by ANNAX to download, display and enhance reviewing of recorded video material. The PIS notifies personnel automatically if the storage of the recorders is about to run out or whether a hard disc error occurred.

ChargingREEL

ChargingREEL

Our ChargingREEL is designed for ceiling, wall and underfloor assemblies and provides perfect adaptation to your e-fleet.
The professional design ensures reliable and durable operation.
Due to the individual cable routing and plug supply systems we are able to provide high flexibility in the implementation of the charging systems.
 
For more information please visit our website:
http://www.epower-charging.com/
 
or download our flyer:
ChargingREEL for electro vehicles

Wabtec Corp Transit Car Products Chevron

Chevron

Primary Suspension

Chevrons

Chevrons

Chevrons offer a wide range of stiffness combinations and easy assembly conditions.

westinghouse air brake technologies company CHRA / Core Assemblies

CHRA / Core Assemblies

Our range of replacement CHRA / Core Assemblies are all assembled and VSR balanced in our own fully equipped UK Core Production Facility. Where possible we incorporate design improvements and use upgraded parts – producing an improved CHRA.
www.melett.com/product-range/chra-core-assemblies

Class Legal Turbocharger - 76mm for NMRA Renegade & NMCA Xtreme Street

Class Legal Turbocharger - 76mm for NMRA Renegade & NMCA Xtreme Street

HP Rating: 1,325
Racing is easy - it's winning that can be the challenge. With 20 champions and 32 record holders in 2010 alone, Precision Turbo and Engine has a longstanding history of building turbochargers that win. We know what it takes to put together the perfect unit to boost you ahead of the competition. Success doesn't come from a standard off-the-shelf turbocharger; it comes from years of dedicated research, development and real-world racing experience. You can trust PTE to get you where you want to be.
 
This Class Legal turbocharger features the following:

  • Exclusive GEN2 CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Higher efficiency and faster transient response for maximum power and performance
  • 76mm inducer compressor wheel
  • Turbine housing options:
       - 1.39 A/R T5 inlet flange turbine housing with a 5" OD (outer diameter) V-band flange discharge
  • Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)

Approved for use in NMRA Renegade and NMCA Xtreme Street. Please verify rules to check legality of the turbocharger prior to purchasing.
 
We're committed to helping you build the quickest and fastest racecars possible by developing the best turbos on the market, period. Precision customers were the first to break the 6-second barrier in Sport Compact racing, the 200MPH barrier in Super Street Outlaw and have won championships and set records in practically every racing sanctioning body out in existence.

Class Legal Turbocharger - 76mm for NMRA Renegade & NMCA Xtreme Street

Class Legal Turbocharger - 76mm for NMRA Renegade & NMCA Xtreme Street

HP Rating: 1,325
Racing is easy - it's winning that can be the challenge. With 20 champions and 32 record holders in 2010 alone, Precision Turbo and Engine has a longstanding history of building turbochargers that win. We know what it takes to put together the perfect unit to boost you ahead of the competition. Success doesn't come from a standard off-the-shelf turbocharger; it comes from years of dedicated research, development and real-world racing experience. You can trust PTE to get you where you want to be.
 
This Class Legal turbocharger features the following:

  • Exclusive GEN2 CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Higher efficiency and faster transient response for maximum power and performance
  • 76mm inducer compressor wheel
  • Turbine housing options:
       - 1.39 A/R T5 inlet flange turbine housing with a 5" OD (outer diameter) V-band flange discharge
  • Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)

 
Approved for use in NMRA Renegade and NMCA Xtreme Street. Please verify rules to check legality of the turbocharger prior to purchasing.
We're committed to helping you build the quickest and fastest racecars possible by developing the best turbos on the market, period. Precision customers were the first to break the 6-second barrier in Sport Compact racing, the 200MPH barrier in Super Street Outlaw and have won championships and set records in practically every racing sanctioning body out in existence.

Class Legal Turbocharger - 76mm for Ultra Street/Ultimate Street

Class Legal Turbocharger - 76mm for Ultra Street/Ultimate Street

HP Rating: 1,300
Racing is easy - it's winning that can be the challenge. With 119 world championships and set over 256 world records since 2008, Precision Turbo and Engine has a longstanding history of building turbochargers that win. We know what it takes to put together the perfect unit to boost you ahead of the competition. Success doesn't come from a standard off-the-shelf turbocharger; it comes from years of dedicated research, development and real-world racing experience. You can trust PTE to get you where you want to be.
 
This Class Legal turbocharger features the following:

  • 76mm inducer/116mm exducer cast compressor wheel
  • Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • 96mm inducer/88mm exducer turbine wheel
  • Turbine housing options:
       - T5 1.39 A/R

Approved for use in Ultra Street/Ultimate Street classes. Please verify rules to check legality of the turbocharger prior to purchasing.
 
We're committed to helping you build the quickest and fastest racecars possible by developing the best turbos on the market, period. Precision customers were the first to break the 6-second barrier in Sport Compact racing, the 200MPH barrier in Super Street Outlaw and have won championships and set records in practically every racing sanctioning body out in existence.

Class Legal Turbocharger - GEN2 Pro Mod 85 for X275

Class Legal Turbocharger - GEN2 Pro Mod 85 for X275

HP Rating: 1,550
Unlike anything else on the market today, Precision's GEN2 Pro Mod turbochargers are set to be a serious game-changer in the world of turbo technology. Precision customers are already setting records with these GEN2 Pro Mod turbos: Jose "El General" Gonzalez has set both the ET and MPH records and Don Walsh, Jr. still holds 1/4 mile MPH record. You could be next!
 
Racing is easy - it's winning that can be the challenge. With 20 champions and 32 record holders in 2010 alone, Precision Turbo and Engine has a longstanding history of building turbochargers that win. We know what it takes to put together the perfect unit to boost you ahead of the competition. Success doesn't come from a standard off-the-shelf turbocharger; it comes from years of dedicated research, development and real-world racing experience. You can trust PTE to get you where you want to be.
 
This Class Legal turbocharger features the following:

  • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Higher efficiency and faster transient response for maximum power and performance
  • 85mm inducer compressor wheel
  • Turbine housing options:
       - T5 1.40 A/R
  • Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)

Approved for use in X275. Please verify rules to check legality of the turbocharger prior to purchasing.
 
We're committed to helping you build the quickest and fastest racecars possible by developing the best turbos on the market, period. Precision customers were the first to break the 6-second barrier in Sport Compact racing, the 200MPH barrier in Super Street Outlaw and have won championships and set records in practically every racing sanctioning body out in existence.

Class Legal Turbocharger - GEN2 PT6785 CEA® for MIR Super Street, True Street and OGS SFWD

Class Legal Turbocharger - GEN2 PT6785 CEA® for MIR Super Street, True Street and OGS SFWD

HP Rating: 1,100
Racing is easy - it's winning that can be the challenge. With 119 world championships and set over 256 world records since 2008, Precision Turbo and Engine has a longstanding history of building turbochargers that win. We know what it takes to put together the perfect unit to boost you ahead of the competition. Success doesn't come from a standard off-the-shelf turbocharger; it comes from years of dedicated research, development and real-world racing experience. You can trust PTE to get you where you want to be.
 
This Class Legal turbocharger features the following:

  • Exclusive GEN2 CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
  • Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)
  • Higher efficiency and faster transient response for maximum power and performance
  • A maximum compressor bore dimension of 67.8mm
  • 85mm exducer turbine wheel
  • Turbine housing options:
        - T4 Divided 1.12 or 1.28 A/R with 4 5/8" OD (outer diameter) V-Band discharge

Approved for use in True Street classes which limit compressor wheel size to a maximum of 67mm. Please verify rules to check legality of the turbocharger prior to purchasing.
 
We're committed to helping you build the quickest and fastest racecars possible by developing the best turbos on the market, period. Precision customers were the first to break the 6-second barrier in Sport Compact racing, the 200MPH barrier in Super Street Outlaw and have won championships and set records in practically every racing sanctioning body out in existence.

Pages