Product Finder

Pages

Pride Bodies - Captivators Bodies

Bodies - Captivators

CAPTIVATOR I
Crane Tower:  10,000 – 25,000 ft/lbs
Body Matrl:  12 & 14 Ga. Satin-Coat
Body Length:  108″ – 60 CA
Body Height:  48″
Compt. Depth:   21″
Compt. Door Matrl:  Double Panel Aluminum
Handles & Hinges:  Stainless Steel
Rear Bumper:  Tubular Type
Cargo Floor:  3/16′ Steel Checker Plate
Light Kit:  CMVSS/FMVSS Compliant
Paint:  PPG – 1 Year Warranty
Chassis Requirements:  15,000 LB GVWR (min)
 
CAPTIVATOR II
Crane Tower:  up to 40,000 ft/lbs
Body Matrl:  12 & 14 Ga. Satin-Coat
Body Length:  134″ – 84 CA
Body Height:  48″
Compt. Depth:   21″
Compt. Door Matrl:  Double Panel Aluminum
Handles & Hinges:  Stainless Steel
Rear Bumper:  Tubular Type
Cargo Floor:  3/16′ Steel Checker Plate
Light Kit:  CMVSS/FMVSS Compliant
Paint:  PPG – 1 Year Warranty
Chassis Requirements:  19,000 LB GVWR (min)
 
CAPTIVATOR III
Crane Tower:  40,000 – 70,000 ft/lbs
Body Matrl:  12 & 14 Ga. Satin-Coat
Body Length:  156″ – 108 CA
Body Height:  60″
Compt. Depth:   22″
Compt. Door Matrl:  Double Panel Aluminum
Handles & Hinges:  Stainless Steel
Rear Bumper:  Tubular Type
Cargo Floor:  3/16′ Steel Checker Plate
Light Kit:  CMVSS/FMVSS Compliant
Paint:  PPG – 1 Year Warranty
Chassis Requirements:  27,500 LB GVWR (min)
 
Standard Features:

  • Automotive Grade Door Seals
  • Gas Shock Type Door Holders
  • Stainless Steel Fastening Hardware
  • Integral Rear Wheel Panels for Added Rigidity
  • Rubber Fenderette on Rear Wheel Panels
  • Full Length Drip Trough – Both Side
  • Adjustable Galvanized Shelves
  • Manual Out and Down Outriggers
  • Crane Compartment Drip Tray
  • Undercoating of Body Understructure
  • 2 Part Primer / 2 Part Paint System
  • Four D-style Tie-down Rings in Cargo Floor
  • 1 Year Parts and Labour Warranty
  • 5 Year Structural Warranty

Options Available: Call your local distributor for a full range of options.

  • Service Tool Packages
  • Work Bence Bumpers
  • 60″ Raised Verticals Complete with Overlapping Doors
  • Hydraulic Outriggers
  • Various Cargo Control Options

Pride Bodies - Lubrication Bodies

Bodies - Lubrication

All Aluminum Construction is the key to Pride Lube Bodies.  Lighter weight equals more Payload and sometimes a smaller chassis is required.  Pride Lube Bodies are fully customized to meet your needs, including tank sizing and pumping systems. 

  • Side or Rear Hose Reel compartment
  • Aluminum, polypropylene or steel product tanks
  • Oil filter drain drawers with reservoir bottoms
  • Tank and cargo area with containment barrier in case of spills
  • Air driven or Hydraulic driven pumping systems
  • Open deck or fully enclosed configurations for cold climates
  • Lube Skids, Lube Trailers, and Service/Lube truck combinations available

Pride Bodies - Railway Bodies

Bodies - Railway

At Pride Bodies Ltd. we also offer units designed to suit the rigorous demand of the Railway industry. Signal & Control Trucks, Track Maintenance Units, Road Repair, Section and Frog Trucks are all part of the long list of designs in the Pride portfolio. As well, we are a certified installation facility for all makes of Railgear, to provide our customers with a one stop, seamless, turn-key transaction.

Pride-Bodies-service-bodies.jpg

Bodies - Service

Our service bodies are hard at work in multiple industries, located all over North America: just look for the Pride Insignia.  With so many customers making the switch, don’t delay; let us be the Pride of your fleet!
 
Our service trucks are manufactured with heavy gauge steel or aluminum with many popular features as standard, Call us about Pride Body construction features:
 
Construction:

  • Solid welding, automotive grade door seals
  • Gas shock type door holders
  • Stainless steel fastenings hardware
  • Integral rear wheel panels for added rigidity
  • Rubber fenderette on rear wheel panels
  • Full length drip trough - both sides
  • Adjustable galvanized shelves
  • Manual out and outriggers
  • Crane compartment drip tray
  • Undercoating of body understruction
  • 2 part primer / 2 part paint system
  • Four D-style tie-down rings in cargo floor
  • 1 year parts and labour warranty
  • 5-year structural warranty

Pride Bodies - Utility Bodies

Bodies - Utility

Pride Aluminum & Steel Utility Bodies Configured the way you want.

  • Flexible compartment sizing
  • Unmatched value
  • Designed to work with all makes of Aerial equipment
  • Call to discuss unique "Pride" features

Wabtec Corp Freight Car Products Body Brake Levers

Body Brake Levers

Body brake levers, featuring I-beam designs to reduce weight, come in a wide range of sizes for use as cylinder, hand brake and floating levers. They are forged from C-1040/1045 special bar quality steel to produce minimum pin hole wear and longer service life. On many of these body brake levers, the center pad provides adjustability for drilling dimensions. Lengths from 10 to 42 inches between end hole centers are available from forging dies.

Wabtec Freight Car Products Bolster Pocket Wear Plates Inserts

Bolster Pocket Wear Plates and Inserts

As the originator of variably damped snubbing, Standard Car Truck’s Barber™ products have been tested, adapted and refined through decades of lab work and field experience to ensure component durability and proper damping operation to protect cars and lading.

  • Standard Car Truck offers a variety of M-976 approved snubbing options
  • On many designs wedges can be removed from pocketswithout special tools and without disassembly of the truck, allowing for easy replacement of wedges and column wearplates 
  • Side wall wear plates and split wedge inserts are easily replaceable, avoiding the need for costly and timeconsuming re-welding of pocket surfaces during reconditioning 
  • Most older trucks may be upgraded to the Barber Splitwedge system simply by adding an insert to the pocket

Wabtec Corporation Freight Car Products Bottom 15°

Bottom 15°

4-Port Receiver with optional Brake Cylinder Read Device. 

  • Wabtec offers 4-Port receivers and a variety of access plates for application with the various pipe bracket mounting arrangements
  • The Automated Single Car Test Device helps save time:

- Over 90% of problems are diagnosed in the first 15 min of testing
- Average test time is approximately 27 minutes; up to 50% time savings

  • Easier failure diagnosis
  • Reduces human errors which cause "false failures" that are commonplace in manual testing
  • To provide more accurate test results, 4 pressure ports (brake pipe, brake cylinder, auxiliary reservoir and emergency reservoir) are monitored, versus monitoring brake pipe and brake cylinder only in end of car testing

Wabtec Transit Bus Products BR2E Ramp

BR2E Ramp

Fully electric, 1:6 slope, passenger access ramp for small, low floor buses. Unique, space-saving, folding design. Water-resistant controls and corrosion-resistant enclosure.

Wabtec Freight Car Products Brake Beam Hangers

Brake Beam Hangers

Forged from C-1045 special bar quality steel, Schaefer Equipment brake beam hangers are heat treated to provide increased strength and long service life. The loop type hangers are offered in various lengths.

Wabtec Freight Car Products Brake Clevises

Brake Clevises

Schaefer brake clevises are forged from C-1040/1045 special bar quality steel to assure greater strength and resistance to wear. They are available in all standard AAR sizes, as well as special sizes and configurations upon request.

No image

Brake Cylinder

10X12 ABU

Wabtec Freight Car Products Brake Cylinder Hose Reel

Brake Cylinder

Aimed at improving our ability to support customer orders with shorter lead times. Wabtec introduced the new universal brake cylinder, available in 10” and 8 1/2” sizes.

  • Incorporates three air flanges with the universal non-pressure head
  • Can be oriented in four different mounting positions
  • Better inventory control and greater flexibility in product usage

Wabtec Freight Car Products Brake Cylinder Hose Reel

Brake Cylinder Hose Reel

  • Standard on cart mount units
  • 50 foot hose

Wabtec Freight Car Products Brake Cylinder Packing Cups

Brake Cylinder Packing Cups

  • ABU Freight Car Brake Cylinders (New Nitrile Rubber Compound)

-8 1/2" and 10" sizes

Wabtec Freight Car Products Brake Cylinder Pressure Taps

Brake Cylinder Pressure Taps

  • Dual seal to protect from leakage. 
  • Various fittings to install the taps in the brake cylinder air line such as:

-Saddle mount fittings
-Flange fittings
-Sandwich plate style flange fittings
-Blanking pad style flange fittings

  • Also available as option on 4-Port Receiver

Wabtec Corp Freight Car Products Brake Cylinder Tubing

Brake Cylinder Tubing

  • Standard on truck mount units
  • 50 foot hose

Wabtec Corp Locomotive Products Brake Cylinders

Brake Cylinders

  • Furnished to suit the space and leverage requirements of locomotives, these cylinders differ from freight car brake cylinders primarily in the wide variety of diameters available and shorter piston strokes
  • The push rod is pinned to the piston hollow rod for positive release of theshoe from the wheel when the piston retracts
  • North American standard for diesel-electric locomotives
  • Wide variety of sizes and push rod configurations available to suit varied application requirements

Wabtec Freight Car Products Brake Cylinders UIC type

Brake Cylinders UIC type

Standard brake cylinder (BC), in accordance with UIC 542 criteria, in following dimensions: 8"", 10"", 12"", 14"", 16"" with free or fixed piston rod. Option-tropical version. All brake cylinder of UIC type are TSI approved.

Wabtec transit Car Products Brake Discs

Brake Discs

Thousands of TecTran discs are currently in service.  Some of the most common disc types are:

  • Forged steel
  • Cast, ventilated monobloc
  • Cast, ventilated segmented

TecTran validates all brake disc designs using a dynamometer.

Pages