Product Finder

Pages

wabtec westinghouse air brake 469-200 Series Air Dryer

469-200 Series Air Dryer

The 469-200 Series Transit Spin-on Air Dryer is a state-of-the-art compressed air filtering/drying assembly. This drying system is a combination of some of the most advanced adsorption technology to date. The 469-200 Air Dryer offers spin-on desiccant cartridges for ease of maintenance. Designed by the Graham-White Engineering Team, with input from our customers, this drying system will provide most rail transit industry applications with...

Read more

Wabtec Corp 4-Ductor industrial products

4-Ductor

Conductor system with insulating PVC housing for up to 4 uninterrupted flat copper conductors. Capacity 35 amps up to 16 amps.

No image

4G EOT

End of Train Device

Wabtec Corp 4-Port Hose Assembly Freight Cars

4-Port Hose Assembly

  • Standard on both cart and truck mount units
  • Detachable
  • Includes interface connector

Wabtec Freight Car 4-Port Receivers and Access Plates

4-Port Receivers and Access Plates

Wabtec offers 4-Port receivers and a variety of access plates for application with the various pipe bracket mounting arrangements
The Automated Single Car Test Device helps save time:

  • Over 90% of problems are diagnosed in the first 15 min of testing
  • Average test time is approximately 27 minutes; up to 50% time savings
  • Easier failure diagnosis
  • Reduces human errors which cause "...
Read more

wabtec westinghouse air brake 500 Series Sander Control Valve

500 Series Sander Control Valve

The 500 Series Sander Control Valve is the "Heart of the Diesel Electric Sanding System" for inboard and outboard sanding. The "3-in-1" System Charges (sand is delivered quickly to the point of contact between the wheel and rail), Sands (sand flow is metered at a constant level), and Cleans (a second blast of sand and air to prevent build up). It does this each time the valve is actuated manually or as programmed by the on-board...

Read more

wabtec westinghouse air brake 506 Double-Acting Bell Ringer

506 Double-Acting Bell Ringer

The 506 Double-Acting Bell Ringer is the standard in the North American locomotive industry for reliability and performance. The clapper is designed to strike the bell on a continuous or intermittent basis as controlled by the operator with our 616 Operating Valve or through some automatic means as developed by the Original Equipment Manufacturer. Unlike earlier technology, the 506 incorporates a unique "dual-action" motion of the...

Read more

wabtec westinghouse air brake 548 Series Manual Drain Valves

548 Series Manual Drain Valves

Several manual drain valves are available for use on air reservoir to remove collected liquids.

wabtec westinghouse air brake 571 Series Relay Valves

571 Series Relay Valves

The 571 Series Relay Valve is a high-capacity, solenoid operated two way valve, with 1" NPT connections for applications when flows of 150-250 SCFM are required. Typical rail applications including horn actuation and automatic emer gency dumping. The 571 Series electro-pneumatic valve is actuated electrically from the cab console or some other automatic-programmable signal. The heavy-duty design with epoxy impregnated and encapsulated "Class F...

Read more
No image

573 Series Sand Trap with Rotary Shut-Off

The 573 Series Sand Trap with Rotary Shut-Off is designed to provide uniform sanding to enhance locomotive traction. It has an adjusting nut and nozzle combination that increases or decreases the amount of sand delivered to the point of contact between the rail and wheel interface. The integral Shut-Off permits the sand trap and controller to be removed without draining all the sand from the sandbox. The T-handle...

Read more

wabtec westinghouse air brake Graham White 580 Series Automatic Drain Valves

580 Series Automatic Drain Valves

The 580 Series Automatic Drain Valve is a high-capacity, double-seated model that is designed to exhaust liquid contaminants from the air reservoir and/or 824 Series Centrifugal Air Filter with Coalescer through dual export ports. The valve is actuated pneumatically by either the compressor unloader solenoid valve or other pneumatic sources on a cycle or regular basis, i.e. 975 Air Dryer actuating source or a locomotive...

Read more

wabtec westinghouse air brake 595 Series Relay Valves

595 Series Relay Valves

The 595 Series Relay Valve is a high-capacity, solenoid operated two way valve with 3/8" NPT connections for applications when flows of 75-150 SCFM are required. It is used in numerous rail air-control applications including horn actuation, automatic emer gency dumping and snow blasting. The unique integral pipe bracket with 3/8" NPT porting is standard and permits easy maintenance as required. No air connections need to be disconnected when...

Read more

wabtec westinghouse air brake 596 Series of Two Way Check (Shuttle) Valve

596 Series of Two Way Check (Shuttle) Valve

The 596 Series of Two Way Check (Shuttle) Valve is manufactured with a heavy-duty corrosion-resistant iron housing. It is equipped with a total of three ports, two inlets and one outlet. This porting allows for quick change-over from desired inlet conditions to the outlet valve side. The check aspect assures that only the desired inlet signal is transmitted to the outlet port. The 596 has 3/8" NPT ports. It is...

Read more

wabtec westinghouse air brake 599 Series One Way Check Valves

599 Series One Way Check Valves

The 599 Series One Way Check Valves are made with a heavy-duty corrosion-resistant iron housing. The 599 is available with 3/8" NPT porting and can be mounted inline. Each have a soft "O" ring style leak proof sealing and an in-line cartridge. The cartridge design allows for inline servicing resulting in a significant reduction in costly out-of-service time during maintenance. The check valve cartridge is designed with a spring...

Read more

Wabtec Locomotive Cylinder Air Cooled Compressor Exhauster

6 Cylinder/4 Cylinder Air Cooled Compressor Exhauster

  • Combination compressor exhauster:

    - 2 or 3 compression cylinders
    - 2, 3 or 4 exhauster cylinders

  • Oil sight gauge
  • Oil pressure indicator
  • Optional oil cooler kit
  • Rated for continuous operation

No image

600 Series Relay Valves

The 600 Series Relay Valve is a high-capacity , solenoid operated three way valve, with 1/2" NPT connections for applications when flows of 75-200 SCFM are required. It is used in numerous rail air-control applications including pneumatic braking. The unique integral pipe bracket with 1/2" NPT porting is standard and permits easy maintenance as required. No air connections need to be disconnected when maintenance is required saving out-of-...

Read more

wabtec westinghouse air brake 616 Series Push-Pull Type Operating Valves

616 Series Push-Pull Type Operating Valves

The 616 Series Push-Pull Type Operating Valves are used for bell actuation, as an emergency stop button, manual sanding, windshield wiper operation and many other pneumatic functions. The unique pipe bracket body design allows for simple installation and maintenance of the integral valve cartridge without disconnecting any air lines. The internal spool valve design allows for smooth operation and reliability...

Read more

Wabtec foldover passenger access ramp Transit Bus

621SA Foldover Ramp

Fully electric, 1:6 slope, foldover passenger access ramp for low floor, transit buses. New, cam-based design allows ramp to automatically adjust to bus stop conditions to provide least possible, continuous slope. Rugged stainless steel enclosure - 1,000 lb. capacity.

No image

626 Series Two-way Ventilator

The 626 Series Two-way Ventilator scoops air in or out for complete control and comfort in the engineer compartment. A one-piece frame design gives increased strength and eliminates the need for screens. It has a completely hingeless design and is easy to operate for maximum cab. It "closes tight and stays tight".

No image

629-000 Cab Awning

The 629-000 Cab Awning is designed to shade the engineer compartment from sun and adverse weather. When not needed, our Cab Awning snaps to a folded position with a pull from the inside. Just as importantly the unique design allows the unit to close upon contact, providing the operator with added safety.

Pages