Product Finder
Pages
|
AEM Series 2 EMS for 1997-98 Nissan 200SX (GA16DE), 1998-99 Nissan 200SX (SR20DE), 1995-98 Nissan 240SX OBD2 (KA24DE), 1996-99 Nissan Altima (KA24DE)AEM Part Number: 30-6611 |
|
AEM Series 2 EMS for 2000-01 Acura Integra, 1998-99 Acura 2.3 CL, 1998-02 Honda Accord 4 Cyl, 1999-00 Honda Civic DX/EX/Si manual transAEM Part Number: 30-6050 |
|
AEM Series 2 EMS for 2000-05 Honda S2000 Manual trans onlyAEM Part Number: 30-6052 |
|
AEM Series 2 EMS for 2002 Acura RSX/RSX Type-S, 2001-05 Honda Civic Manual Trans Only, 2001-04 K-enginesAEM Part Number: 30-6030 |
|
AEROvent / CarVentWhen rapid or vacuum unloading railcars it is necessary to make sure the cars are properly vented in order to avoid disaster and achieve a higher flow capacity. Typically, a hatch cover can be opened but in some situations contamination is a concern. Our AEROVent is an innovative solution to car venting that is typically more cost effective than putting vented covers on the car. |
|
Aftermarket Replacement Turbocharger - 4828HP Rating: 400 |
|
Aftermarket Replacement Turbocharger - 5128HP Rating: 450 |
|
Aftermarket Replacement Turbocharger - 5130HP Rating: 460 |
|
Aftermarket Replacement Turbocharger - 5530HP Rating: 525 |
|
Aftermarket Replacement Turbocharger - 6235HP Rating: 700 |
|
Aftermarket Spare Parts for Heat Recovery EquipmentSince Thermal Transfer Corporation's recuperators and heat exchangers have no moving parts, they do not require the customer to maintain an extensive spare parts inventory. However, spare tubes, spare tube bundles, or complete spare units can be provided upon request. Because of the long delivery time typically required to fabricate a recuperator or heat exchanger, we recommend purchasing... |
No image | |
|
|
No image | |
No image | |
|
Air Dryer UnitsThe E-1A and E-1A HP Twin-Tower Air Dryer Units used in Wabtec compressors are engineered for high-duty-cycle operation. These units provide consistently dry air with minimum post-compression air consumption. Featuring continuous output, this dryer purges one desiccant tower, while the other tower performs the drying cycle. Components include a spin-off, bead-type desiccant with built in prefilter, a mechanical liquid separator, an R-1 drain valve, a... |
|
Air Hose HangerConsisting of a five-piece forged and welded unit, the air hose hanger incorporates a ball and socket design that enables the integral 60-degree hose fitting to swing in any direction. Since hose and fittings can move with the coupler, hose kinking, tracking and breaking are reduced. A welding plate attaches completed assemblies to the car. The unit includes a 1 1/4 inch, 60-degree angle fitting for application to cars with long shank couplers and/or sliding... |
|
Air Hose Support CableAir Hose Support Cable (AH22). AAR S-4006 approved. Over 500,000 in service. Quick use carabiner clips make install easy.
|
|
Air Hose Support ChainAir Hose Support Chain (CC22). AAR S-4006 approved. Quick use carabiner clips make install easy.
|
|
Air ReservoirsReservoirs with various volumes, dimensions and connections according to EN and AAR norms. Technical characteristics are in accordance with regulations for high-pressure vessels. EN norms air reservoirs are CE certified.
|