|
|
Sta-Put™ with Strap video
ZT-625-RED-FX
ZT-625-GRN-FX
ZT-642-KIT– Universal Sidescreen Chock Storage Hanger w/ hardware
ZT-643-01 – Sta-Put Application Placard
- Strap Affixed for application to Autoflex/CTTX Racks
- AAR-Approved
- Lo-profile design addresses reduced underbody clearances
- Three adjustable...
Read more |
|
|
Sta-Put™ Conventional Bi-Level video
ZT-625-RED Sta-Put Chock - Right/Red
ZT-625-GRN Sta-Put Chock - Left/Green
ZT-642-KIT – Universal Sidescreen Chock Storage Hanger w/ hardware.
ZT-643-02 – Sta-Put Application Placard.
- Designed for Bi and Tri-level Autoracks
- 48 Sta-Put chocks required per standard...
Read more |
|
|
ZT-108 – Rear Door Guide – Existing Cars (slotted holes)
ZT-108-01 – Rear Door Guide – New door application (round holes)
ZT-131 – Door Guide Conversion Kit (welds directly to existing bracket
- Serves as a permanently lubricated door guide for radial end doors on bi-level and tri-level autorack cars
- ZefTuf® material eliminates steel-on-steel wear and improves door...
Read more |
|
|
ZT-1696-R
Offering Brake Beam Guides made from ZefTuf® CFR-P material that incorporates the benefits of superior cold flow and impact resistance needed for today’s demanding rail environment.
- Thicker base keeps brake beams centered on wheel treads.
- Compatible with brake beams from any manufacturer
- Improve brake shoe life
- Reduce brake beam...
Read more |
|
|
ZT-1696B (Heavy Duty)
Offering Brake Beam Guides made from ZefTuf® CFR-P material that incorporates the benefits of superior cold flow and impact resistance needed for today’s demanding rail environment.
- Thicker walls for high mileage cars and a longer life cycle
- Replaces AAR Standard S-367, Holland WE-5500 XL
- Black
- Compatible with brake beams from any...
Read more |
|
|
ZT-1696NH (Standard)
Offering Brake Beam Guides made from ZefTuf® CFR-P material that incorporates the benefits of superior cold flow and impact resistance needed for today’s demanding rail environment.
- Replaces AAR Standard S-367, Holland WE-5500, Holland WE-5505
- Grey
- Compatible with brake beams from any manufacturer
- Improve brake shoe life
- Reduce...
Read more |
|
|
ZT-139 Series
ZefTuf® Brake Rod Support Wear Protectors for Double-Stack Well Cars are welded directly to side posts to eliminate metal-to-metal contact and vibration damage.
- Other lengths available by request (up to 20”)
- 0.15 Static/Dynamic Coefficient of Friction
- Well Cars – 3” & 4”
|
|
|
ZT-380 - 16" x 2" Center Bowl Liner
ZT-381 - 16" x 2 1/4" Center Bowl Liner
ZT-370 - 14" Center Plate Wear Protector (Horizontal Liner)
ZT-371 - 16" Center Plate Wear Protector (Horizontal Liner)
Center Bowl Liners and Center Plate Protectors
- Available in ZefTuf CFR low friction materials
- Designed to improve curving and lateral stability performance of truck...
Read more |
|
|
ZT-350 -16" x 2" Center Bowl Liner
ZT-351 -16" x 2 1/4" Center Bowl Liner
ZT-561 - 16" Center Plate Wear Protector (Horizontal Liner)
- Available in ZefTuf® CFR-P material for superior cold flow resistance and higher friction
- Designed to improve curving and lateral stability performance of truck systems
- Integrally molded studs provide consistent...
Read more |
|
|
ZT-326 Series
ZT-327 Series
Wabtec offers a variety of coupler carrier wear protectors to protect against coupler shank wear.
- Zeftuf-HD® bonded to A-36 steel for easy weld-on application without removing the coupler
- Eliminates coupler shank inspection, maintenance and reconditioning costs of conventional coupler carrier wear plates
- Provides...
Read more |
|
|
ZT-360
Wabtec offers a variety of ZefTuf® coupler carrier wear protectors to protect against coupler shank wear.
- Eliminate coupler shank and draft sill basket wear
- 50-lbs lighter than the Steel Alternative
- Requires no lubrication
- Available in four sizes for varying coupler height requirements
Read more |
|
|
ZT-140 Series
ZefTuf®-HD CoilGard® Crossbar Liners eliminate across-the-coil damage caused by restraining devices during shipment.
- Available in standard widths of 4 1/2" and 5 1/2" x 66" long
- Custom applications and lengths available
|
|
|
ZT-10638-40
ZT-10614-40
Segmented Wear Plates replace 6 competitive wear plates used on sliding sill cars and used extensively on extendable semi-trailers and chassis.
- Available in 1/4” or 3/8” overall thickness
- ZefTek’s 8-pad segmented design can be sawed or sheared to desired length
- Bonded to 1/8”x3”x40” A-36 steel
- Multiple thicknesses offered - 1/4", 3/8"
- The only...
Read more |
|
|
ZT-215-T
ZT-217
Wabtec offers a variety of coupler carrier wear protectors to protect against coupler shank wear.
- Requires no lubrication and eliminates inspection, maintenance and replacement costs associated with conventional coupler carrier wearplates
- ZefTuf® 'G' material provides superior cold flow and impact resistance
- Multiple...
Read more |
